Skip to content

MikeLooijmans/phytool

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

20 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

phytool

Linux MDIO register access

Usage

phytool read  IFACE/ADDR/REG
phytool write IFACE/ADDR/REG <0-0xffff>
phytool print IFACE/ADDR[/REG]

where

ADDR := C22 | C45
C22  := <0-0x1f>
C45  := <0-0x1f>:<0-0x1f>
REG  := <0-0x1f>

Note: Not all MDIO drivers support the port:device Clause 45 address format.

The read and write commands are simple register level accessors. The print command will pretty-print a register. When using the print command, the register is optional. If left out, the most common registers will be shown.

Examples

~ # phytool read eth4/0/4
0x0de1

~ # phytool print eth0/0
ieee-phy: id:0x01410eb1

   ieee-phy: reg:BMCR(0x00) val:0x1140
      flags:          -reset -loopback +aneg-enable -power-down -isolate -aneg-restart -collision-test
      speed:          1000-full

   ieee-phy: reg:BMSR(0x01) val:0x7949
      capabilities:   -100-b4 +100-f +100-h +10-f +10-h -100-t2-f -100-t2-h
      flags:          +ext-status -aneg-complete -remote-fault +aneg-capable -link -jabber +ext-register

mv6tool

Marvell Link Street register access

Usage

mv6tool read  LOCATION/REG
mv6tool write LOCATION/REG <0-0xffff>
mv6tool print LOCATION[/REG]
mv6tool print IFACE

where

LOCATION := IFACE/<port|phy> | DEV/<ADDR|phyN|portN|globalG|serdes>

DEV  := <0-0x1f>
ADDR := <0-0x1f>
N    := <0-0xa>
G    := <0-2>
REG  := <0-0x1f>

The read and write commands are simple register level accessors. The print command will pretty-print a register. When using the print command, the register is optional. If left out, the most common registers will be shown.

Examples

~ # mv6tool 1/global1/0
mv6: model:mv88e6097 dev:1 global:1
   mv6: reg:00 val:0xc800

~ # mv6tool print eth1-1
mv6: model:mv88e6352 dev:0 port:1
   mv6: reg:PS(0x00) val:0x100f
      flags:          -pause-en -my-pause +phy-detect -link -eee -tx-paused -flow-ctrl
      speed:          10-half
      mode:           0xf

   mv6: reg:PC(0x04) val:0x1414
      flags:          -router-header +igmp-snoop -vlan-tunnel -tag-if-both
      egress-mode:    01, untagged
      frame-mode:     00, normal
      initial-pri:    01, tag prio
      egress-floods:  01, allow UC
      port-state:     00, disabled

Origin & References

phytool is developed and maintained by Tobias Waldekranz.
Please file bug fixes and pull requests at GitHub

About

Linux MDIO register access

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 95.7%
  • Makefile 4.3%