Update from base #16
Merged
Update from base #16
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
dtc recently added PCI bus checks. Fix these warnings: arch/arm64/boot/dts/cavium/thunder2-99xx.dtb: Warning (pci_bridge): Node /pci missing bus-range for PCI bridge arch/arm64/boot/dts/cavium/thunder2-99xx.dtb: Warning (unit_address_vs_reg): Node /pci has a reg or ranges property, but no unit name Signed-off-by: Rob Herring <[email protected]> Cc: Jayachandran C <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
…kernel/git/khilman/linux-amlogic into fixes Amlogic fixes for v4.16-rc1 - DT: fix UART address ranges - DT: enable PHY interrupts * tag 'amlogic-fixes' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson: uart: fix address space range ARM64: dts: meson-gxl: add internal ethernet PHY irq
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <[email protected]> Suggested-by: Rob Herring <[email protected]> Signed-off-by: Mathieu Malaterre <[email protected]> Acked-by: Matthias Brugger <[email protected]> Acked-by: Andy Gross <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
…cm/linux/kernel/git/abelloni/linux into fixes Pull "AT91 SOC fixes for 4.16" from Alexandre Belloni: - change my email address * tag 'at91-ab-4.16-soc-fixes' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: ARM: at91: update my email address
The array of string pointers is put in __initconst, and the strings themselves
are marke 'const' but the the pointers are not, which caused a warning when
built with LTO:
arch/arm/mach-clps711x/board-dt.c:72:20: error: 'clps711x_compat' causes a section type conflict with 'feroceon_ids'
static const char *clps711x_compat[] __initconst = {
This marks the array itself const as well, which was certainly the
intention originally.
Signed-off-by: Arnd Bergmann <[email protected]>
Building with LTO revealed that three spi_board_info arrays are marked
__initconst, but not const:
arch/arm/mach-davinci/board-dm365-evm.c: In function 'dm365_evm_init':
arch/arm/mach-davinci/board-dm365-evm.c:729:30: error: 'dm365_evm_spi_info' causes a section type conflict with 'dm646x_edma_device'
static struct spi_board_info dm365_evm_spi_info[] __initconst = {
^
arch/arm/mach-davinci/dm646x.c:603:42: note: 'dm646x_edma_device' was declared here
static const struct platform_device_info dm646x_edma_device __initconst = {
This marks them const as well, as was originally intended.
Signed-off-by: Arnd Bergmann <[email protected]>
… into fixes Pull "mvebu fixes for 4.16 (part 1)" from Gregory CLEMENT: - Updating my emails address (from free-electrons to bootlin) - Adding back the selection of the PL310 Errata fix for the Cortex A9 based Armada SoCs (Armada 375 and 38x) * tag 'mvebu-fixes-4.16-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix broken PL310_ERRATA_753970 selects MAINTAINERS: update email address for Gregory CLEMENT
…pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.16-rc cycle This is mostly SoC related fixes for clocks, interconnect, and PM with few board specifc dts related fixes: - Fix quirk handling for ti-sysc to check all quirk flags instead of just the first one - Fix LogicPD boards for i2c1 muxing to avoid intermittent PMIC errors - Fix debounce-interval use for omap5-uevm - Fix debugfs_create_*() usage for omap1 - Fix sar_base initialization for HS omaps - Fix omap3 prm wake interrupt for resume - Fix kmemleak for omap_get_timer_dt() - Enable optional clocks before main clock to prevent interconnect target module from being stuck in transition * tag 'omap-for-v4.16/fixes-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix checking of no-reset-on-init quirk ARM: dts: LogicPD SOM-LV: Fix I2C1 pinmux ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux ARM: dts: OMAP5: uevm: Fix "debounce-interval" property misspelling ARM: OMAP1: clock: Fix debugfs_create_*() usage ARM: OMAP2+: Fix sar_base inititalization for HS omaps ARM: OMAP3: Fix prm wake interrupt for resume ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt ARM: OMAP2+: hwmod_core: enable optional clocks before main clock
…pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Pull "Rockchip dts32 fixes for 4.16" from Heiko Stübner: Fix wrong dwmmc tuning clocks that may make probing HS cards fail to probe and removal of special opps from the phycore boards that may run the cpu outside the soc-vendor specs. * tag 'v4.16-rockchip-dts32fixes-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Fix DWMMC clocks ARM: dts: rockchip: Remove 1.8 GHz operation point from phycore som
…pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Pull "Rockchip dts64 fixes for 4.16" from Heiko Stübner: Fixes of dwmmc tuning clocks that may make probing HS cards fail, adding the grf-vio clock to the edp so that it can also be build as module, correct pcie ep-gpio on the sapphire board and finally a fix that makes the gmac work at gigabit speeds on the rk3328-rock64. * tag 'v4.16-rockchip-dts64fixes-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix DWMMC clocks arm64: dts: rockchip: introduce pclk_vio_grf in rk3399-eDP device node arm64: dts: rockchip: correct ep-gpios for rk3399-sapphire arm64: dts: rockchip: fix rock64 gmac2io stability issues
A section type mismatch warning shows up when building with LTO,
since orion_ge00_mvmdio_bus_name was put in __initconst but not marked
const itself:
include/linux/of.h: In function 'spear_setup_of_timer':
arch/arm/mach-spear/time.c:207:34: error: 'timer_of_match' causes a section type conflict with 'orion_ge00_mvmdio_bus_name'
static const struct of_device_id timer_of_match[] __initconst = {
^
arch/arm/plat-orion/common.c:475:32: note: 'orion_ge00_mvmdio_bus_name' was declared here
static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
^
As pointed out by Andrew Lunn, it should in fact be 'const' but not
'__initconst' because the string is never copied but may be accessed
after the init sections are freed. To fix that, I get rid of the
extra symbol and rewrite the initialization in a simpler way that
assigns both the bus_id and modalias statically.
I spotted another theoretical bug in the same place, where d->netdev[i]
may be an out of bounds access, this can be fixed by moving the device
assignment into the loop.
Cc: [email protected]
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared
objects must use PIC PLT. To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.
On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches. Linker can always reduce
PLT32 relocation to PC32 if function is defined locally. Local
functions should use PC32 relocation. As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.
R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in
binutils master branch which will become binutils 2.31.
[ hjl is working on having better documentation on this all, but a few
more notes from him:
"PLT32 relocation is used as marker for PC-relative branches. Because
of EBX, it looks odd to generate PLT32 relocation on i386 when EBX
doesn't have GOT.
As for symbol resolution, PLT32 and PC32 relocations are almost
interchangeable. But when linker sees PLT32 relocation against a
protected symbol, it can resolved locally at link-time since it is
used on a branch instruction. Linker can't do that for PC32
relocation"
but for the kernel use, the two are basically the same, and this
commit gets things building and working with the current binutils
master - Linus ]
Signed-off-by: H.J. Lu <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
nfs4_update_server unconditionally releases the nfs_client for the source server. If migration fails, this can cause the source server's nfs_client struct to be left with a low reference count, resulting in use-after-free. Also, adjust reference count handling for ELOOP. NFS: state manager: migration failed on NFSv4 server nfsvmu10 with error 6 WARNING: CPU: 16 PID: 17960 at fs/nfs/client.c:281 nfs_put_client+0xfa/0x110 [nfs]() nfs_put_client+0xfa/0x110 [nfs] nfs4_run_state_manager+0x30/0x40 [nfsv4] kthread+0xd8/0xf0 BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 nfs4_xdr_enc_write+0x6b/0x160 [nfsv4] rpcauth_wrap_req+0xac/0xf0 [sunrpc] call_transmit+0x18c/0x2c0 [sunrpc] __rpc_execute+0xa6/0x490 [sunrpc] rpc_async_schedule+0x15/0x20 [sunrpc] process_one_work+0x160/0x470 worker_thread+0x112/0x540 ? rescuer_thread+0x3f0/0x3f0 kthread+0xd8/0xf0 This bug was introduced by 32e62b7 ("NFS: Add nfs4_update_server"), but the fix applies cleanly to 52442f9 ("NFS4: Avoid migration loops") Reported-by: Helen Chao <[email protected]> Fixes: 52442f9 ("NFS4: Avoid migration loops") Signed-off-by: Bill Baker <[email protected]> Reviewed-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
The structure nlmclnt_fl_close_lock_ops s local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: fs/nfs/nfs3proc.c:876:33: warning: symbol 'nlmclnt_fl_close_lock_ops' was not declared. Should it be static? Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
samples/seccomp relies on the host setting which is not suitable for
crosscompilation and it actually fails when crosscompiling s390 and
powerpc all{yes,mod}config on x86_64 with
samples/seccomp/bpf-helper.h:135:2: error: #error __BITS_PER_LONG value unusable.
#error __BITS_PER_LONG value unusable.
^
In file included from samples/seccomp/bpf-fancy.c:13:0:
samples/seccomp/bpf-fancy.c: In function ‘main’:
samples/seccomp/bpf-fancy.c:38:11: error: ‘__NR_exit’ undeclared (first use in this function)
SYSCALL(__NR_exit, ALLOW),
and many others. I am doing these for compile testing and it's been
quite useful to catch issues. Crosscompiling sample code on the other
hand doesn't seem all that important so it seems like the easiest way to
simply disable samples/seccomp when crosscompiling.
Fixing this properly is not that easy as Kees explains:
: IIRC, one of the problems is with build ordering problems: the kernel
: headers used by the samples aren't available when cross compiling.
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
The header files for some structures could get included in such a way that struct attributes (specifically __randomize_layout from path.h) would be parsed as variable names instead of attributes. This could lead to some instances of a structure being unrandomized, causing nasty GPFs, etc. This patch makes sure the compiler_types.h header is included in kconfig.h so that we've always got types and struct attributes defined, since kconfig.h is included from the compiler command line. Reported-by: Patrick McLean <[email protected]> Root-caused-by: Maciej S. Szmigiero <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Tested-by: Maciej S. Szmigiero <[email protected]> Fixes: 3859a27 ("randstruct: Mark various structs for randomization") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Each read from a file in efivarfs results in two calls to EFI (one to get the file size, another to get the actual data). On X86 these EFI calls result in broadcast system management interrupts (SMI) which affect performance of the whole system. A malicious user can loop performing reads from efivarfs bringing the system to its knees. Linus suggested per-user rate limit to solve this. So we add a ratelimit structure to "user_struct" and initialize it for the root user for no limit. When allocating user_struct for other users we set the limit to 100 per second. This could be used for other places that want to limit the rate of some detrimental user action. In efivarfs if the limit is exceeded when reading, we take an interruptible nap for 50ms and check the rate limit again. Signed-off-by: Tony Luck <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <[email protected]>: mm: don't defer struct page initialization for Xen pv guests lib/Kconfig.debug: enable RUNTIME_TESTING_MENU vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems selftests/memfd: add run_fuse_test.sh to TEST_FILES bug.h: work around GCC PR82365 in BUG() mm/swap.c: make functions and their kernel-doc agree (again) mm/zpool.c: zpool_evictable: fix mismatch in parameter name and kernel-doc ida: do zeroing in ida_pre_get() mm, swap, frontswap: fix THP swap if frontswap enabled certs/blacklist_nohashes.c: fix const confusion in certs blacklist kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE mm, mlock, vmscan: no more skipping pagevecs mm: memcontrol: fix NR_WRITEBACK leak in memcg and system stats Kbuild: always define endianess in kconfig.h include/linux/sched/mm.h: re-inline mmdrop() tools: fix cross-compile var clobbering
…/kernel/git/kees/linux into fixes-v4.16-rc3 - Fix seccomp GET_METADATA to deal with field sizes correctly (Tycho Andersen) - Add selftest to make sure GET_METADATA doesn't regress (Tycho Andersen)
Before, if cb->start() failed, the module reference would never be put, because cb->cb_running is intentionally false at this point. Users are generally annoyed by this because they can no longer unload modules that leak references. Also, it may be possible to tediously wrap a reference counter back to zero, especially since module.c still uses atomic_inc instead of refcount_inc. This patch expands the error path to simply call module_put if cb->start() fails. Fixes: 41c8742 ("netlink: do not set cb_running if dump's start() errs") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
If an attempt is made to disable RX checksums, USB adapter is changed but netdev->features is not, because smsc75xx_set_features() returns a non zero value. This throws errors from netdev_rx_csum_fault() : <devname>: hw csum failure Signed-off-by: Eric Dumazet <[email protected]> Cc: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
BBR uses tcp_tso_autosize() in an attempt to probe what would be the
burst sizes and to adjust cwnd in bbr_target_cwnd() with following
gold formula :
/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal;
But GSO can be lacking or be constrained to very small
units (ip link set dev ... gso_max_segs 2)
What we really want is to have enough packets in flight so that both
GSO and GRO are efficient.
So in the case GSO is off or downgraded, we still want to have the same
number of packets in flight as if GSO/TSO was fully operational, so
that GRO can hopefully be working efficiently.
To fix this issue, we make tcp_tso_autosize() unaware of
sk->sk_gso_max_segs
Only tcp_tso_segs() has to enforce the gso_max_segs limit.
Tested:
ethtool -K eth0 tso off gso off
tc qd replace dev eth0 root pfifo_fast
Before patch:
for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
691 (ss -temoi shows cwnd is stuck around 6 )
667
651
631
517
After patch :
# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
1733 (ss -temoi shows cwnd is around 386 )
1778
1746
1781
1718
Fixes: 0f8782e ("tcp_bbr: add BBR congestion control")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Oleksandr Natalenko <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
The result of the skb flow dissect is copied from keys to hash_keys to ensure only the intended data is hashed. The original L4 hash patch overlooked setting the addr_type for this case; add it. Fixes: bf4e0a3 ("net: ipv4: add support for ECMP hash policy choice") Reported-by: Ido Schimmel <[email protected]> Signed-off-by: David Ahern <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
AFAIK the only version of smc9194.c with Mac support is the one in the linux-mac68k CVS repo, which never made it to the mainline. Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194 under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55. (See pre-git era "[PATCH] add m68k dependencies to net driver config".) Signed-off-by: Finn Thain <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The login buffer is released before the driver can perform sanity checks between resources the driver requested and what firmware will provide. Don't release the login buffer until the sanity check is performed. Fixes: 34f0f4e ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
…el.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V cleanups from Palmer Dabbelt: "This contains a handful of small cleanups. The only functional change is that IRQs are now enabled during exception handling, which was found when some warnings triggered with `CONFIG_DEBUG_ATOMIC_SLEEP=y`. The remaining fixes should have no functional change: `sbi_save()` has been renamed to `parse_dtb()` reflect what it actually does, and a handful of unused Kconfig entries have been removed" * tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Rename sbi_save to parse_dtb to improve code readability RISC-V: Enable IRQ during exception handling riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select riscv: kconfig: Remove RISCV_IRQ_INTC select riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB select
…t/rdma/rdma
Pull rdma fixes from Doug Ledford:
"Nothing in this is overly interesting, it's mostly your garden variety
fixes.
There was some work in this merge cycle around the new ioctl kABI, so
there are fixes in here related to that (probably with more to come).
We've also recently added new netlink support with a goal of moving
the primary means of configuring the entire subsystem to netlink
(eventually, this is a long term project), so there are fixes for
that.
Then a few bnxt_re driver fixes, and a few minor WARN_ON removals, and
that covers this pull request. There are already a few more fixes on
the list as of this morning, so there will certainly be more to come
in this rc cycle ;-)
Summary:
- Lots of fixes for the new IOCTL interface and general uverbs flow.
Found through testing and syzkaller
- Bugfixes for the new resource track netlink reporting
- Remove some unneeded WARN_ONs that were triggering for some users
in IPoIB
- Various fixes for the bnxt_re driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (27 commits)
RDMA/uverbs: Fix kernel panic while using XRC_TGT QP type
RDMA/bnxt_re: Avoid system hang during device un-reg
RDMA/bnxt_re: Fix system crash during load/unload
RDMA/bnxt_re: Synchronize destroy_qp with poll_cq
RDMA/bnxt_re: Unpin SQ and RQ memory if QP create fails
RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters
RDMA/restrack: don't use uaccess_kernel()
RDMA/verbs: Check existence of function prior to accessing it
RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file
RDMA/uverbs: Sanitize user entered port numbers prior to access it
RDMA/uverbs: Fix circular locking dependency
RDMA/uverbs: Fix bad unlock balance in ib_uverbs_close_xrcd
RDMA/restrack: Increment CQ restrack object before committing
RDMA/uverbs: Protect from command mask overflow
IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroy
IB/uverbs: Improve lockdep_check
RDMA/uverbs: Protect from races between lookup and destroy of uobjects
IB/uverbs: Hold the uobj write lock after allocate
IB/uverbs: Fix possible oops with duplicate ioctl attributes
IB/uverbs: Add ioctl support for 32bit processes
...
Similar to the ancient commit a5fe8e7 ("regulatory: add NUL to alpha2"), add another byte to alpha2 in the request struct so that when we use nla_put_string(), we don't overrun anything. Fixes: 73d54c9 ("cfg80211: add regulatory netlink multicast group") Reported-by: Kees Cook <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
…kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a handful of char/misc driver fixes for 4.16-rc3. There are some binder driver fixes to resolve reported issues in stress testing the recent binder changes, some extcon driver fixes, and a few mei driver fixes and new device ids. All of these, with the exception of the mei driver id additions, have been in linux-next for a while. I forgot to push out the mei driver id additions to kernel.org until today, but all build tests pass with them enabled" * tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: add cannon point device ids for 4th device mei: me: add cannon point device ids mei: set device client to the disconnected state upon suspend. ANDROID: binder: synchronize_rcu() when using POLLFREE. binder: replace "%p" with "%pK" ANDROID: binder: remove WARN() for redundant txn error binder: check for binder_thread allocation failure in binder_poll() extcon: int3496: process id-pin first so that we start with the right status Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" extcon: axp288: Constify the axp288_pwr_up_down_info array
…dcom/stblinux into fixes Pull "Broadcom drivers fixes for 4.16" from Florian Fainelli: This pull request contains Broadcom SoCs drivers fixes for 4.16, please pull the following: - Markus provides two minor fixes to the Broadcom STB DPFE driver, one to properly mask bits, and a second one to use the correct type. The third commit is a consequence of a newer DFPE firmware which would unfortunately crash without appropriate kernel changes. * tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux: memory: brcmstb: dpfe: support new way of passing data from the DCPU memory: brcmstb: dpfe: fix type declaration of variable "ret" memory: brcmstb: dpfe: properly mask vendor error bits
…ub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fix from Palmer Dabbelt:
"This week we have a single fix: replacing smp_mb() with __smp_mb().
We were the only architecture with smp_mb() and it appears to just be
clearly wrong, so I think this is a pretty safe patch for an RC"
* tag 'riscv-for-linus-4.16-rc4_smp_mb' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv/barrier: Define __smp_{mb,rmb,wmb}
…/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is the first set of bugfixes for ARM SoCs, fixing a couple of
stability problems, mostly on TI OMAP and Rockchips platforms:
- OMAP2 hwmod clocks must be enabled in the correct order
- OMAP3 Wakeup from resume through PRM IRQ was unreliable
- one regression on OMAP5 caused by a kexec fix
- Rockchip ethernet needs some settings for stable operation on
Rock64
- Rockchip based Chrombook Plus needs another clock setting for
stable display suspend/resume
- Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
clock frequency
- Rockchip MMC link was sometimes unreliable
- multiple fixes to avoid crashes in the Broadcom STB DPFE driver
Other minor changes include:
- Devicetree fixes for incorrect hardware description (rockchip,
omap, Gemini, amlogic)
- some MAINTAINER file updates to correct email and git addresses
- some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
cavium, qualcomm, hisilicon, zx)
- fixes for LTO-compilation (orion, davinci, clps711x)
- one fix for an incorrect Kconfig errata selection
- a memory leak in the OMAP timer driver
- a kernel data leak in OMAP1 debugfs files"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
MAINTAINERS: update entries for ARM/STM32
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
ARM: omap2: set CONFIG_LIRC=y in defconfig
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
ARM: orion: fix orion_ge00_switch_board_info initialization
ARM: davinci: mark spi_board_info arrays as const
ARM: clps711x: mark clps711x_compat as const
arm: zx: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: cavium: fix PCI bus dtc warnings
MAINTAINERS: ARM: at91: update my email address
soc: imx: gpc: de-register power domains only if initialized
ARM: dts: rockchip: Fix DWMMC clocks
...
…rg/drm/drm-intel into drm-fixes - 2 display fixes: audio av_enc_map overflow check, and Cannonlake PLL related register offset. - 3 gem fixes: Clear for in-fence out-fence, fix for clearing exec_flags on execbuf failure, and add back global seqno to tracepoints that had been removed recently by other fence related patch. * tag 'drm-intel-fixes-2018-02-28' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Make global seqno known in i915_gem_request_execute tracepoint drm/i915: Clear the in-use marker on execbuf failure drm/i915/cnl: Fix PORT_TX_DW5/7 register address drm/i915/audio: fix check for av_enc_map overflow drm/i915: Fix rsvd2 mask when out-fence is returned
…/drm-misc into drm-fixes Two regression fixes here: a fb format regression on nouveau and a 4.16-rc1 regression with on LVDS with one sun4i device. Plus a sun4i and a virtio-gpu fixes. * tag 'drm-misc-fixes-2018-02-28' of git://people.freedesktop.org/drm-misc: virtio-gpu: fix ioctl and expose the fixed status to userspace. drm/sun4i: Protect the TCON pixel clocks drm/sun4i: Enable the output on the pins (tcon0) drm/nouveau: prefer XBGR2101010 for addfb ioctl
…linux into drm-fixes A few misc fixes for 4.16. * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: skip ECC for SRIOV in gmc late_init drm/amd/amdgpu: Correct VRAM width for APUs with GMC9 drm/amdgpu: fix&cleanups for wb_clear drm/amdgpu: Correct sdma_v4 get_wptr(v2) drm/amd/powerplay: fix power over limit on Fiji drm/amdgpu:Fixed wrong emit frame size for enc drm/amdgpu: move WB_FREE to correct place drm/amdgpu: only flush hotplug work without DC drm/amd/display: check for ipp before calling cursor operations
We are using test_and_* operations on the status and flag fields of struct sock_mapping. However, these functions require the operand to be 64-bit aligned on arm64. Currently, only status is 64-bit aligned. Make status and flags explicitly 64-bit aligned. Signed-off-by: Stefano Stabellini <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
The intel-vbtn device will not be able to wake up the system any more after removing the notify handler provided by its driver, so make its sysfs attributes reflect that. Fixes: 91f9e85 (platform: x86: intel-vbtn: Wake up the system from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
The intel-hid device will not be able to wake up the system any more after removing the notify handler provided by its driver, so make its sysfs attributes reflect that. Fixes: ef88411 (platform: x86: intel-hid: Wake up the system from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
In case of a failed write request (all retries failed) and when using libata, the SCSI error handler calls scsi_finish_command(). In the case of blk-mq this means that scsi_mq_done() does not get called, that blk_mq_complete_request() does not get called and also that the mq-deadline .completed_request() method is not called. This results in the target zone of the failed write request being left in a locked state, preventing that any new write requests are issued to the same zone. Fix this by replacing the .completed_request() method with the .finish_request() method as this method is always called whether or not a request completes successfully. Since the .finish_request() method is only called by the blk-mq core if a .prepare_request() method exists, add a dummy .prepare_request() method. Fixes: 5700f69 ("mq-deadline: Introduce zone locking support") Cc: Hannes Reinecke <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> [ bvanassche: edited patch description ] Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
There is lack of cache destroy operation for ceph_file_cachep when failing from fscache register. Signed-off-by: Chengguang Xu <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
The vm counters is counted in sectors, so we should do the conversation in submit_bio. Fixes: 74d4699 ("block: replace bi_bdev with a gendisk pointer and partitions index") Cc: [email protected] Reviewed-by: Omar Sandoval <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jiufei Xue <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
bio_devname use __bdevname to display the device name, and can only show the major and minor of the part0, Fix this by using disk_name to display the correct name. Fixes: 74d4699 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Omar Sandoval <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jiufei Xue <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Fix a typo in pkt_start_recovery. Fixes: 74d4699 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jiufei Xue <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
…/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Fix up device tree properties readout caused by my own refactorings" * tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Handle deferred probing in of_find_gpio() properly gpiolib: Keep returning EPROBE_DEFER when we should
…nel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two smallish pin control fixes: one actual code fix for the Meson and a MAINTAINERS update. Summary: - fix a pin group on the Meson - assign maintainers for Freescale/NXP pin controllers" * tag 'pinctrl-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: add Freescale pin controllers pinctrl: meson-axg: adjust uart_ao_b pin group naming
…el/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only core change is the fix for possible memory corruption by ALSA ctl API since 4.14 kernel due to a thinko. The rest are all device-specific: in addition to the usual suspects (HD-audio and USB-audio fixups), a few LPE HDMI audio fixes came in at this time" * tag 'sound-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: x86: Fix potential crash at error path ALSA: x86: Fix missing spinlock and mutex initializations ALSA: control: Fix memory corruption risk in snd_ctl_elem_read ALSA: hda - Fix pincfg at resume on Lenovo T470 dock ALSA: usb-audio: Add a quirck for B&W PX headphones ALSA: hda: Add a power_save blacklist ALSA: x86: hdmi: Add single_port option for compatible behavior
%pULL doesn't officially exist but %pUL does. Miscellanea: o Add missing newlines to a couple logging messages Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Darren Hart (VMware) <[email protected]>
…/git/pmladek/printk Pull printk fix from Petr Mladek: "Make sure that we wake up userspace loggers. This fixes a race introduced by the console waiter logic during this merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Wake klogd when passing console_lock owner
…git/shli/md Pull MD bugfixes from Shaohua Li: - fix raid5-ppl flush request handling hang from Artur - fix a potential deadlock in raid5/10 reshape from BingJing - fix a deadlock for dm-raid from Heinz - fix two md-cluster of raid10 from Lidong and Guoqing - fix a NULL deference problem in device removal from Neil - fix a NULL deference problem in raid1/raid10 in specific condition from Yufen - other cleanup and fixes * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid1: fix NULL pointer dereference md: fix a potential deadlock of raid5/raid10 reshape md-cluster: choose correct label when clustered layout is not supported md: raid5: avoid string overflow warning raid5-ppl: fix handling flush requests md raid10: fix NULL deference in handle_write_completed() md: only allow remove_and_add_spares when no sync_thread running. md: document lifetime of internal rdev pointer. md: fix md_write_start() deadlock w/o metadata devices MD: Free bioset when md_run fails raid10: change the size of resync window for clustered raid md-multipath: Use seq_putc() in multipath_status() md/raid1: Fix trailing semicolon md/raid5: simplify uninitialization of shrinker
…inux-platform-drivers-x86 Pull x86 platform drivers fixes from Andy Shevchenko: - fix a regression on laptops like Dell XPS 9360 where keyboard stopped working. - correct sysfs wakeup attribute after removal of some drivers to reflect that they are not able to wake system up anymore. * tag 'platform-drivers-x86-v4.16-5' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: wmi: Fix misuse of vsprintf extension %pULL platform/x86: intel-hid: Reset wakeup capable flag on removal platform/x86: intel-vbtn: Reset wakeup capable flag on removal platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's
…/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - MCIP aka ARconnect fixes for SMP builds [Euginey] - preventive fix for SLC (L2 cache) flushing [Euginey] - Kconfig default fix [Ulf Magnusson] - trailing semicolon fixes [Luis de Bethencourt] - other assorted minor fixes * tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: setup cpu possible mask according to possible-cpus dts property ARC: mcip: update MCIP debug mask when the new cpu came online ARC: mcip: halt GFRC counter when ARC cores halt ARCv2: boot log: fix HS48 release number arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb ARC: Fix malformed ARC_EMUL_UNALIGNED default ARC: boot log: Fix trailing semicolon ARC: dw2 unwind: Fix trailing semicolon ARC: Enable fatal signals on boot for dev platforms ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
…airlied/linux Pull drm fixes from Dave Airlie: "Pretty much run of the mill drm fixes. amdgpu: - power management fixes - some display fixes - one ppc 32-bit dma fix i915: - two display fixes - three gem fixes sun4i: - display regression fixes nouveau: - display regression fix virtio-gpu: - dumb airlied ioctl fix" * tag 'drm-fixes-for-v4.16-rc4' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/amdgpu: skip ECC for SRIOV in gmc late_init drm/amd/amdgpu: Correct VRAM width for APUs with GMC9 drm/amdgpu: fix&cleanups for wb_clear drm/amdgpu: Correct sdma_v4 get_wptr(v2) drm/amd/powerplay: fix power over limit on Fiji drm/amdgpu:Fixed wrong emit frame size for enc drm/amdgpu: move WB_FREE to correct place drm/amdgpu: only flush hotplug work without DC drm/amd/display: check for ipp before calling cursor operations drm/i915: Make global seqno known in i915_gem_request_execute tracepoint drm/i915: Clear the in-use marker on execbuf failure drm/i915/cnl: Fix PORT_TX_DW5/7 register address drm/i915/audio: fix check for av_enc_map overflow drm/i915: Fix rsvd2 mask when out-fence is returned virtio-gpu: fix ioctl and expose the fixed status to userspace. drm/sun4i: Protect the TCON pixel clocks drm/sun4i: Enable the output on the pins (tcon0) drm/nouveau: prefer XBGR2101010 for addfb ioctl drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE drm/amd/display: VGA black screen from s3 when attached to hook ...
* cpufreq-scpi: cpufreq: scpi: Fix incorrect arm_big_little config dependency cpufreq: scpi: invoke frequency-invariance setter function
…git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in cpufreq drivers: one recent regression, one
leftover Kconfig dependency and one old but "stable" material.
Specifics:
- Make the task scheduler load and utilization signals be
frequency-invariant again after recent changes in the SCPI cpufreq
driver (Dietmar Eggemann).
- Drop an unnecessary leftover Kconfig dependency from the SCPI
cpufreq driver (Sudeep Holla).
- Fix the initialization of the s3c24xx cpufreq driver (Viresh
Kumar)"
* tag 'pm-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()
cpufreq: scpi: Fix incorrect arm_big_little config dependency
cpufreq: scpi: invoke frequency-invariance setter function
…l/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - mmc: core: Avoid hang when claiming host MMC host: - dw_mmc: Avoid hang when accessing registers - dw_mmc: Fix out-of-bounds access for slot's caps - dw_mmc-k3: Fix out-of-bounds access through DT alias - sdhci-pci: Fix S0i3 for Intel BYT-based controllers" * tag 'mmc-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Avoid hanging to claim host for mmc via some nested calls mmc: dw_mmc: Avoid accessing registers in runtime suspended state mmc: dw_mmc: Fix out-of-bounds access for slot's caps mmc: dw_mmc: Factor out dw_mci_init_slot_caps mmc: dw_mmc-k3: Fix out-of-bounds access through DT alias mmc: sdhci-pci: Fix S0i3 for Intel BYT-based controllers
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This is a little larger than
usual at this time, but that's mainly because I was out on vacation
last week. Nothing in here is major in any way, it's just two weeks of
fixes. This contains:
- NVMe pull from Keith, with a set of fixes from the usual suspects.
- mq-deadline zone unlock fix from Damien, fixing an issue with the
SMR zone locking added for 4.16.
- two bcache fixes sent in by Michael, with changes from Coly and
Tang.
- comment typo fix from Eric for blktrace.
- return-value error handling fix for nbd, from Gustavo.
- fix a direct-io case where we don't defer to a completion handler,
making us sleep from IRQ device completion. From Jan.
- a small series from Jan fixing up holes around handling of bdev
references.
- small set of regression fixes from Jiufei, mostly fixing problems
around the gendisk pointer -> partition index change.
- regression fix from Ming, fixing a boundary issue with the discard
page cache invalidation.
- two-patch series from Ming, fixing both a core blk-mq-sched and
kyber issue around token freeing on a requeue condition"
* tag 'for-linus-20180302' of git://git.kernel.dk/linux-block: (24 commits)
block: fix a typo
block: display the correct diskname for bio
block: fix the count of PGPGOUT for WRITE_SAME
mq-deadline: Make sure to always unlock zones
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nbd: fix return value in error handling path
bcache: fix kcrashes with fio in RAID5 backend dev
bcache: correct flash only vols (check all uuids)
blktrace_api.h: fix comment for struct blk_user_trace_setup
blockdev: Avoid two active bdev inodes for one device
genhd: Fix BUG in blkdev_open()
genhd: Fix use after free in __blkdev_get()
genhd: Add helper put_disk_and_module()
genhd: Rename get_disk() to get_disk_and_module()
genhd: Fix leaked module reference for NVME devices
direct-io: Fix sleep in atomic due to sync AIO
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
block: kyber: fix domain token leak during requeue
blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch
...
Pull ceph fixes from Ilya Dryomov: "A cap handling fix from Zhi that ensures that metadata writeback isn't delayed and three error path memory leak fixups from Chengguang" * tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-client: ceph: fix potential memory leak in init_caches() ceph: fix dentry leak when failing to init debugfs libceph, ceph: avoid memory leak when specifying same option several times ceph: flush dirty caps of unlinked inode ASAP
…inux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Five minor fixes for Xen-specific drivers" * tag 'for-linus-4.16a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: 64-bit align flags x86/xen: add tty0 and hvc0 as preferred consoles for dom0 xen-netfront: Fix hang on device removal xen/pirq: fix error path cleanup when binding MSIs xen/pvcalls: fix null pointer dereference on map->sock
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.