Update from base #13
Merged
Update from base #13
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: "Y2038 fix for cmt-speech" * tag 'hsi-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: use timespec64 instead of timespec
…t/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - bq27xxx: add bq27521 support - drop unused imx-snvs-poweroff driver - improve axp288 driver - misc fixes * tag 'for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: max17042_battery: Always fall back to default platform-data power: supply: max17042_battery: Check battery current for status when supplied MAINTAINERS: Add AXP288 PMIC entry power: supply: axp288_fuel_gauge: Do not register our psy on (some) HDMI sticks power: supply: axp288_fuel_gauge: Optimize get_current() power: supply: axp288_fuel_gauge: Rework get_status() power: reset: account for const type of of_device_id.data power: supply: account for const type of of_device_id.data bq24190: Simplify code in property_is_writeable power: supply: axp288_fuel_gauge: Get iio-channels once during boot power: supply: axp288_charger: Properly stop work on probe-error / remove power: supply: axp288_charger: Simplify extcon cable handling power: supply: axp288_charger: Use the right property for the input current limit power: supply: axp288_charger: Pick lower input current limit not higher power: supply: axp288_charger: Do not cache input current limit value power: supply: axp288_charger: Remove no longer needed locking power: supply: axp288_charger: Use regmap_update_bits to set the input limits power: supply: axp288_charger: Cleanup some double empty lines power: supply: axp288_charger: Remove charger-enabled state tracking power: supply: axp288_charger: Add missing newlines to some messages ...
Pull IPMI updates from Corey Minyard: "Small fixes for various things, been sitting in next for a while (some a long time)" * tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi: ipmi_ssif: Remove duplicate NULL check ipmi/powernv: Fix error return code in ipmi_powernv_probe() ipmi: use dynamic memory for DMI driver override ipmi/ipmi_powernv: remove outdated todo in powernv IPMI driver ipmi: Clear smi_info->thread to prevent use-after-free during module unload ipmi: use correct string length ipmi_si: Fix error handling of platform device ipmi watchdog: fix typo in parameter description ipmi_si_platform: Fix typo in parameter description
…/git/jikos/hid Pull HID updates from Jiri Kosina: - remove hid_have_special_driver[] entry hard requirement for any newly supported VID/PID by a specific non-core hid driver, and general related cleanup of HID matching core, from Benjamin Tissoires - support for new Wacom devices and a few small fixups for already supported ones in Wacom driver, from Aaron Armstrong Skomra and Jason Gerecke - sysfs interface fix for roccat driver from Dan Carpenter - support for new Asus HW (T100TAF, T100HA, T200TA) from Hans de Goede - improved support for Jabra devices, from Niels Skou Olsen - other assorted small fixes and new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() HID: asus: Fix special function keys on T200TA HID: asus: Add touchpad max x/y and resolution info for the T200TA HID: wacom: Add support for One by Wacom (CTL-472 / CTL-672) HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktop HID: elecom: rewrite report fixup for EX-G and future mice HID: sony: Report DS4 version info through sysfs HID: sony: Print reversed MAC address via %pMR HID: wacom: EKR: ensure devres groups at higher indexes are released HID: rmi: Support the Fujitsu R726 Pad dock using hid-rmi HID: add quirk for another PIXART OEM mouse used by HP HID: quirks: make array hid_quirks static HID: hid-multitouch: support fine-grain orientation reporting HID: asus: Add product-id for the T100TAF and T100HA keyboard docks HID: elo: clear BTN_LEFT mapping HID: multitouch: Combine all left-button events in a frame HID: multitouch: Only look at non touch fields in first packet of a frame HID: multitouch: Properly deal with Win8 PTP reports with 0 touches ...
…/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: - handle 'infinitely'-long sleeping tasks, from Miroslav Benes - remove 'immediate' feature, as it turns out it doesn't provide the originally expected semantics, and brings more issues than value * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add locking to force and signal functions livepatch: Remove immediate feature livepatch: force transition to finish livepatch: send a fake signal to all blocking tasks
…ernel/git/jmorris/linux-security Pull integrity updates from James Morris: "This contains a mixture of bug fixes, code cleanup, and new functionality. Of note is the integrity cache locking fix, file change detection, and support for a new EVM portable and immutable signature type. The re-introduction of the integrity cache lock (iint) fixes the problem of attempting to take the i_rwsem shared a second time, when it was previously taken exclusively. Defining atomic flags resolves the original iint/i_rwsem circular locking - accessing the file data vs. modifying the file metadata. Although it fixes the O_DIRECT problem as well, a subsequent patch is needed to remove the explicit O_DIRECT prevention. For performance reasons, detecting when a file has changed and needs to be re-measured, re-appraised, and/or re-audited, was limited to after the last writer has closed, and only if the file data has changed. Detecting file change is based on i_version. For filesystems that do not support i_version, remote filesystems, or userspace filesystems, the file was measured, appraised and/or audited once and never re-evaluated. Now local filesystems, which do not support i_version or are not mounted with the i_version option, assume the file has changed and are required to re-evaluate the file. This change does not address detecting file change on remote or userspace filesystems. Unlike file data signatures, which can be included and distributed in software packages (eg. rpm, deb), the existing EVM signature, which protects the file metadata, could not be included in software packages, as it includes file system specific information (eg. i_ino, possibly the UUID). This pull request defines a new EVM portable and immutable file metadata signature format, which can be included in software packages" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima/policy: fix parsing of fsuuid ima: Use i_version only when filesystem supports it integrity: remove unneeded initializations in integrity_iint_cache entries ima: log message to module appraisal error ima: pass filename to ima_rdwr_violation_check() ima: Fix line continuation format ima: support new "hash" and "dont_hash" policy actions ima: re-introduce own integrity cache lock EVM: Add support for portable signature format EVM: Allow userland to permit modification of EVM-protected metadata ima: relax requiring a file signature for new files with zero length
…l/git/jmorris/linux-security Pull smack updates from James Morris: "Two minor fixes" * 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: Smack: Privilege check on key operations Smack: fix dereferenced before check
…git/jmorris/linux-security
Pull tpm updates from James Morris:
- reduce polling delays in tpm_tis
- support retrieving TPM 2.0 Event Log through EFI before
ExitBootServices
- replace tpm-rng.c with a hwrng device managed by the driver for each
TPM device
- TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead
of returning -EINVAL for unknown TPM commands. This makes user space
more sound.
- CLKRUN fixes:
* Keep #CLKRUN disable through the entier TPM command/response flow
* Check whether #CLKRUN is enabled before disabling and enabling it
again because enabling it breaks PS/2 devices on a system where it
is disabled
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: remove unused variables
tpm: remove unused data fields from I2C and OF device ID tables
tpm: only attempt to disable the LPC CLKRUN if is already enabled
tpm: follow coding style for variable declaration in tpm_tis_core_init()
tpm: delete the TPM_TIS_CLK_ENABLE flag
tpm: Update MAINTAINERS for Jason Gunthorpe
tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
tpm_tis: Move ilb_base_addr to tpm_tis_data
tpm2-cmd: allow more attempts for selftest execution
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
tpm: Move Linux RNG connection to hwrng
tpm: use struct tpm_chip for tpm_chip_find_get()
tpm: parse TPM event logs based on EFI table
efi: call get_event_log before ExitBootServices
tpm: add event log format version
tpm: rename event log provider files
tpm: move tpm_eventlog.h outside of drivers folder
tpm: use tpm_msleep() value as max delay
tpm: reduce tpm polling delay in tpm_tis_core
tpm: move wait_for_tpm_stat() to respective driver files
…nel/git/jmorris/linux-security Pull seccomp updates from James Morris: "Add support for retrieving seccomp metadata" * 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ptrace, seccomp: add support for retrieving seccomp metadata seccomp: hoist out filter resolving logic
…/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "A small pull request this time, just three patches, and one of these is just a comment update (swap the FSF physical address for a URL). The other two patches are small bug fixes found by szybot/syzkaller; they individual patch descriptions should tell you all you ever wanted to know" * tag 'selinux-pr-20180130' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: skip bounded transition processing if the policy isn't loaded selinux: ensure the context is NUL terminated in security_context_to_sid_core() security: replace FSF address with web source in license notices
…/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Enforce the setting of keys for keyed aead/hash/skcipher
algorithms.
- Add multibuf speed tests in tcrypt.
Algorithms:
- Improve performance of sha3-generic.
- Add native sha512 support on arm64.
- Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
- Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
- Add cryptd_max_cpu_qlen module parameter to cryptd.
Drivers:
- Add support for EIP97 engine in inside-secure.
- Add inline IPsec support to chelsio.
- Add RevB core support to crypto4xx.
- Fix AEAD ICV check in crypto4xx.
- Add stm32 crypto driver.
- Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
- Add Derived Key Protocol (DKP) support in caam.
- Add Samsung Exynos True RNG driver.
- Add support for Exynos5250+ SoCs in exynos PRNG driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
crypto: picoxcell - Fix error handling in spacc_probe()
crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
crypto: testmgr - add new testcases for sha3
crypto: sha3-generic - export init/update/final routines
crypto: sha3-generic - simplify code
crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
crypto: sha3-generic - fixes for alignment and big endian operation
crypto: aesni - handle zero length dst buffer
crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
crypto: axis - remove unnecessary platform_get_resource() error check
crypto: testmgr - test misuse of result in ahash
crypto: inside-secure - make function safexcel_try_push_requests static
crypto: aes-generic - fix aes-generic regression on powerpc
crypto: chelsio - Fix indentation warning
crypto: arm64/sha1-ce - get rid of literal pool
crypto: arm64/sha2-ce - move the round constant table to .rodata section
...
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
It's 'MMS114_INFORMATION', not 'MMS114_INFOMATION' Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
Use touchscreen_properties structure instead of implementing all properties by our own. It allows us to reuse generic code for parsing device-tree properties (which was implemented manually in the driver for now). Additionally, it allows us to report events using generic touchscreen_report_pos(), which automatically handles inverted and swapped axes. This fixes the issue with the custom code incorrectly handling case where ts->inverted_x and ts->swapped_x_y were true, but ts->inverted_y was false. Assuming we have 720x1280 touch panel, ts->abs_x_max == 1279 and ts->abs_y_max == 719 (because we inverted that in goodix_read_config()). Now let's assume that we received event from (0:0) position (in touch panel original coordinates). In function goodix_ts_report_touch() we calculate input_x as 1279, but after swapping input_y takes that value (which is more that maximum 719 value reported during initialization). Note that since touchscreen coordinates are 0-indexed, we now report touchscreen range as (0:size-1). Developed and tested on custom DT-based device with gt1151 touch panel. Signed-off-by: Marcin Niestroj <[email protected]> [dtor: fix endianness annotation reported by sparse, handle errors when initializing MT slots] Signed-off-by: Dmitry Torokhov <[email protected]>
follow_pte_pmd() can theoretically return after having acquired a PMD lock, even when DAX was not compiled with CONFIG_FS_DAX_PMD. Release the PMD lock unconditionally. Link: http://lkml.kernel.org/r/[email protected] Fixes: f729c8c ("dax: wrprotect pmd_t in dax_mapping_entry_mkclean") Signed-off-by: Jan H. Schönherr <[email protected]> Reviewed-by: Ross Zwisler <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
In case of running scripts/decodecode without any parameters in order to give a copy'n'pasted Code line from, for example, email it would parse only first line of it, while in emails it's split to few. ie, when you have a file out of oops the Code line looks like Code: hh hh ... <hh> ... hh\n When copy'n'paste from, for example, email where sender or some middle MTA split it, the line looks like: Code: hh hh ... hh\n hh ... <hh> ... hh\n hh hh ... hh\n The Code line followed by another oops line usually contains characters out of hex digit + space + < + > set. So add logic to join this split back if and only if the following lines have hex digits, or spaces, or '<', or '>' characters. It will be quite unlikely to have a broken input in well formed Oops or dmesg, thus a simple regex is being used. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Andy Shevchenko <[email protected]> Cc: Will Deacon <[email protected]> Cc: Dave Martin <[email protected]> Cc: Philippe Ombredanne <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
The current find done in find_other_sources() excludes directories in the kernel tree that are named 'include', eg.: ./security/apparmor/include ./security/selinux/include ./drivers/net/wireless/broadcom/brcm80211/include ./drivers/gpu/drm/amd/acp/include ./drivers/gpu/drm/amd/display/include ./drivers/gpu/drm/amd/include ./drivers/gpu/drm/nouveau/include This changes the find command in find_other_sources() to include those using the -path option. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arend van Spriel <[email protected]> Cc: Robert Jarzmik <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Commit 7c2c11b ("arch: define weak abort()") has introduced a weak abort() which is common for all arch. And, so we will not need arch specific abort which has the same code as the weak abort(). Remove the abort() for m32r. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Sudip Mukherjee <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
This code has been commented out for 12 years. Remove it. Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED7EF9E@H3CMLB14-EX.srv.huawei-3com.com Signed-off-by: Changwei Ge <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: alex chen <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
It's odd that o2net_msg_handler::nh_func_data is declared as type o2net_msg_handler_func*. So neaten it. Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F1F554DA@H3CMLB14-EX.srv.huawei-3com.com Signed-off-by: Changwei Ge <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Alex Chen <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Add an obvious error message, due to mismatched cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration. If we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this mismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume(), since ocfs2_dismount_volume() will also print its own message. I looked through all the code of OCFS2 (include o2cb); there is not any place which returns this error. In fact, the function calling path ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init -> dlm_new_lockspace is a very specific one. We can use this errno to give the user a more clear tip, since this case is a little common during cluster migration, but the customer can quickly get the failure cause if there is a error printed. Also, I think it is not possible to add this errno in the o2cb path during ocfs2_dlm_init(), since the o2cb code has been stable for a long time. We only print this error tip when the user uses pcmk stack, since using the o2cb stack the user will not meet this error. [[email protected]: v2] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Gang He <[email protected]> Reviewed-by: Mark Fasheh <[email protected]> Acked-by: Joseph Qi <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
When some nodes of cluster face with TCP connection fault, ocfs2 will pick up a quorum to continue to work and other nodes will be fenced by resetting host. In order to decide which node should be fenced, ocfs2 leverages o2quo_state::qs_holds. If that variable is reduced to zero, then a try to decide if fence local node is performed. However, under a specific scenario that local node is not disconnected from others at the same time, above method has a problem to reduce ::qs_holds to zero. Because, o2net 90s idle timer corresponding to different nodes is triggered one after another. node 2 node 3 90s idle timer elapses clear ::qs_conn_bm set hold 40s is passed 90 idle timer elapses clear ::qs_conn_bm set hold still up timer elapses clear hold (NOT to zero ) 90s idle timer elapses AGAIN still up timer elapses. clear hold still up timer elapses To solve this issue, a node which has already be evicted from ::qs_conn_bm can't set hold again and again invoked from idle timer. Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F1F3F93B@H3CMLB12-EX.srv.huawei-3com.com Signed-off-by: Yang Zhang <[email protected]> Signed-off-by: Changwei Ge <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
…der() Use the OCFS2_XATTR_ROOT_SIZE macro improves the readability of the code. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Alex Chen <[email protected]> Reviewed-by: Jun Piao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Stack variable fe is no longer used, so trim it to save some CPU cycles and stack space. Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F1F5A8DD@H3CMLB14-EX.srv.huawei-3com.com Signed-off-by: Changwei Ge <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
If metadata is corrupted such as 'invalid inode block', we will get
failed by calling 'mount()' and then set filesystem readonly as below:
ocfs2_mount
ocfs2_initialize_super
ocfs2_init_global_system_inodes
ocfs2_iget
ocfs2_read_locked_inode
ocfs2_validate_inode_block
ocfs2_error
ocfs2_handle_error
ocfs2_set_ro_flag(osb, 0); // set readonly
In this situation we need return -EROFS to 'mount.ocfs2', so that user
can fix it by fsck. And then mount again. In addition, 'mount.ocfs2'
should be updated correspondingly as it only return 1 for all errno.
And I will post a patch for 'mount.ocfs2' too.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jun Piao <[email protected]>
Reviewed-by: Alex Chen <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Changwei Ge <[email protected]>
Reviewed-by: Gang He <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
If we can't get inode lock immediately in the function
ocfs2_inode_lock_with_page() when reading a page, we should not return
directly here, since this will lead to a softlockup problem when the
kernel is configured with CONFIG_PREEMPT is not set. The method is to
get a blocking lock and immediately unlock before returning, this can
avoid CPU resource waste due to lots of retries, and benefits fairness
in getting lock among multiple nodes, increase efficiency in case
modifying the same file frequently from multiple nodes.
The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1)
looks like:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
dump_stack+0x5c/0x82
panic+0xd5/0x21e
watchdog_timer_fn+0x208/0x210
__hrtimer_run_queues+0xcc/0x200
hrtimer_interrupt+0xa6/0x1f0
smp_apic_timer_interrupt+0x34/0x50
apic_timer_interrupt+0x96/0xa0
</IRQ>
RIP: 0010:unlock_page+0x17/0x30
RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004
RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00
R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518
R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300
ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2]
ocfs2_readpage+0x41/0x2d0 [ocfs2]
filemap_fault+0x12b/0x5c0
ocfs2_fault+0x29/0xb0 [ocfs2]
__do_fault+0x1a/0xa0
__handle_mm_fault+0xbe8/0x1090
handle_mm_fault+0xaa/0x1f0
__do_page_fault+0x235/0x4b0
trace_do_page_fault+0x3c/0x110
async_page_fault+0x28/0x30
RIP: 0033:0x7fa75ded638e
RSP: 002b:00007ffd6657db18 EFLAGS: 00010287
RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700
RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700
RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000
R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770
R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000
About performance improvement, we can see the testing time is reduced,
and CPU utilization decreases, the detailed data is as follows. I ran
multi_mmap test case in ocfs2-test package in a three nodes cluster.
Before applying this patch:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2754 ocfs2te+ 20 0 170248 6980 4856 D 80.73 0.341 0:18.71 multi_mmap
1505 root rt 0 222236 123060 97224 S 2.658 6.015 0:01.44 corosync
5 root 20 0 0 0 0 S 1.329 0.000 0:00.19 kworker/u8:0
95 root 20 0 0 0 0 S 1.329 0.000 0:00.25 kworker/u8:1
2728 root 20 0 0 0 0 S 0.997 0.000 0:00.24 jbd2/sda1-33
2721 root 20 0 0 0 0 S 0.664 0.000 0:00.07 ocfs2dc-3C8CFD4
2750 ocfs2te+ 20 0 142976 4652 3532 S 0.664 0.227 0:00.28 mpirun
ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
Tests with "-b 4096 -C 32768"
Thu Dec 28 14:44:52 CST 2017
multi_mmap..................................................Passed.
Runtime 783 seconds.
After apply this patch:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2508 ocfs2te+ 20 0 170248 6804 4680 R 54.00 0.333 0:55.37 multi_mmap
155 root 20 0 0 0 0 S 2.667 0.000 0:01.20 kworker/u8:3
95 root 20 0 0 0 0 S 2.000 0.000 0:01.58 kworker/u8:1
2504 ocfs2te+ 20 0 142976 4604 3480 R 1.667 0.225 0:01.65 mpirun
5 root 20 0 0 0 0 S 1.000 0.000 0:01.36 kworker/u8:0
2482 root 20 0 0 0 0 S 1.000 0.000 0:00.86 jbd2/sda1-33
299 root 0 -20 0 0 0 S 0.333 0.000 0:00.13 kworker/2:1H
335 root 0 -20 0 0 0 S 0.333 0.000 0:00.17 kworker/1:1H
535 root 20 0 12140 7268 1456 S 0.333 0.355 0:00.34 haveged
1282 root rt 0 222284 123108 97224 S 0.333 6.017 0:01.33 corosync
ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
Tests with "-b 4096 -C 32768"
Thu Dec 28 15:04:12 CST 2017
multi_mmap..................................................Passed.
Runtime 487 seconds.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 1cce4df ("ocfs2: do not lock/unlock() inode DLM lock")
Signed-off-by: Gang He <[email protected]>
Reviewed-by: Eric Ren <[email protected]>
Acked-by: alex chen <[email protected]>
Acked-by: piaojun <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
We need catch the errno returned by ocfs2_xattr_get_nolock() and assign it to 'ret' for printing and noticing upper callers. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Jun Piao <[email protected]> Reviewed-by: Alex Chen <[email protected]> Reviewed-by: Yiwen Jiang <[email protected]> Acked-by: Gang He <[email protected]> Acked-by: Changwei Ge <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Some stack variables are no longer used but still assigned. Trim them. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Changwei Ge <[email protected]> Reviewed-by: Jun Piao <[email protected]> Reviewed-by: Alex Chen <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
The race between *set_acl and *get_acl will cause getting incomplete
xattr data as below:
processA processB
ocfs2_set_acl
ocfs2_xattr_set
__ocfs2_xattr_set_handle
ocfs2_get_acl_nolock
ocfs2_xattr_get_nolock:
processB may get incomplete xattr data if processA hasn't set_acl done.
So we should use 'ip_xattr_sem' to protect getting extended attribute in
ocfs2_get_acl_nolock(), as other processes could be changing it
concurrently.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jun Piao <[email protected]>
Reviewed-by: Alex Chen <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Current code assume that ::w_unwritten_list always has only one item on. This is not right and hard to get understood. So improve how to count unwritten item. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Changwei Ge <[email protected]> Reported-by: John Lightsey <[email protected]> Tested-by: John Lightsey <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joel Becker <[email protected]> Cc: Changwei Ge <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Currently, when booting a kernel with DMI support on a platform that has no DMI tables, the following output is emitted into the kernel log: [ 0.128818] DMI not present or invalid. ... [ 1.306659] dmi: Firmware registration failed. ... [ 2.908681] dmi-sysfs: dmi entry is absent. The first one is a pr_info(), but the subsequent ones are pr_err()s that complain about a condition that is not really an error to begin with. So let's clean this up, and give up silently if dma_available is not set. Signed-off-by: Ard Biesheuvel <[email protected]> Acked-by: Martin Hundebøll <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
When pulling the recent pinctrl merge, I was surprised by how a
pinctrl-only pull request ended up rebuilding basically the whole
kernel.
The reason for that ended up being that <linux/device.h> included
<linux/pinctrl/devinfo.h>, so any change to that file ended up causing
pretty much every driver out there to be rebuilt.
The reason for that was because 'struct device' has this in it:
#ifdef CONFIG_PINCTRL
struct dev_pin_info *pins;
#endif
but we already avoid header includes for these kinds of things in that
header file, preferring to just use a forward-declaration of the
structure instead. Exactly to avoid this kind of header dependency.
Since some drivers seem to expect that <linux/pinctrl/devinfo.h> header
to come in automatically, move the include to <linux/pinctrl/pinctrl.h>
instead. It might be better to just make the includes more targeted,
but I'm not going to review every driver.
It would definitely be good to have a tool for finding and minimizing
header dependencies automatically - or at least help with them. Right
now we almost certainly end up having way too many of these things, and
it's hard to test every single configuration.
FWIW, you can get a sense of the "hotness" of a header file with something
like this after doing a full build:
find . -name '.*.o.cmd' -print0 |
xargs -0 tail --lines=+2 |
grep -v 'wildcard ' |
tr ' \\' '\n' |
sort | uniq -c | sort -n | less -S
which isn't exact (there are other things in those '*.o.cmd' than just
the dependencies, and the "--lines=+2" only removes the header), but
might a useful approximation.
With this patch, <linux/pinctrl/devinfo.h> drops to "only" having 833
users in the current x86-64 allmodconfig. In contrast, <linux/device.h>
has 14857 build files including it directly or indirectly.
Of course, the headers that absolutely _everybody_ includes (things like
<linux/types.h> etc) get a score of 23000+.
Cc: Linus Walleij <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
…linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This update to Kselftest consists of fixes, cleanups, and SPDX license
additions"
* tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: update .gitignore with missing generated file
selftests/x86: Add <test_name>{,_32,_64} targets
selftests: Fix loss of test output in run_kselftests.sh
selftest: ftrace: Fix to add 256 kprobe events correctly
selftest: ftrace: Fix to pick text symbols for kprobes
selftests: media_tests: Add SPDX license identifier
selftests: kselftest.h: Add SPDX license identifier
selftests: kselftest_install.sh: Add SPDX license identifier
selftests: gen_kselftest_tar.h: Add SPDX license identifier
selftests: media_tests: Fix Makefile 'clean' target warning
tools/testing: Fix trailing semicolon
kselftest: fix OOM in memory compaction test
selftests: seccomp: fix compile error seccomp_bpf
…el/git/jejb/scsi Pull second set of SCSI updates from James Bottomley: "This is a set of three patches that depended on mq and zone changes in the block tree (now upstream)" * tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Remove zone write locking scsi: sd_zbc: Initialize device request queue zoned data scsi: scsi-mq-debugfs: Show more information
…rnel/git/gfs2/linux-gfs2 Pull GFS2 fixes from Bob Peterson: "Andreas Gruenbacher wrote two additional patches that we would like merged in this time. Both are regressions: - fix another kernel build dependency problem - fix a performance regression in glock dumps" * tag 'gfs2-4.16.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Glock dump performance regression fix gfs2: Fix the crc32c dependency
Pull networking fixes from David Miller:
1) The bnx2x can hang if you give it a GSO packet with a segment size
which is too big for the hardware, detect and drop in this case.
From Daniel Axtens.
2) Fix some overflows and pointer leaks in xtables, from Dmitry Vyukov.
3) Missing RCU locking in igmp, from Eric Dumazet.
4) Fix RX checksum handling on r8152, it can only checksum UDP and TCP
packets. From Hayes Wang.
5) Minor pacing tweak to TCP BBR congestion control, from Neal
Cardwell.
6) Missing RCU annotations in cls_u32, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
Revert "defer call to mem_cgroup_sk_alloc()"
soreuseport: fix mem leak in reuseport_add_sock()
net: qlge: use memmove instead of skb_copy_to_linear_data
net: qed: use correct strncpy() size
net: cxgb4: avoid memcpy beyond end of source buffer
cls_u32: add missing RCU annotation.
r8152: set rx mode early when linking on
r8152: fix wrong checksum status for received IPv4 packets
nfp: fix TLV offset calculation
net: pxa168_eth: add netconsole support
net: igmp: add a missing rcu locking section
ibmvnic: fix firmware version when no firmware level has been provided by the VIOS server
vmxnet3: remove redundant initialization of pointer 'rq'
lan78xx: remove redundant initialization of pointer 'phydev'
net: jme: remove unused initialization of 'rxdesc'
rtnetlink: remove check for IFLA_IF_NETNSID
rocker: fix possible null pointer dereference in rocker_router_fib_event_work
inet: Avoid unitialized variable warning in inet_unhash()
net: bridge: Fix uninitialized error in br_fdb_sync_static()
openvswitch: Remove padding from packet before L3+ conntrack processing
...
…vm into x86/pti Pull the KVM prerequisites so the IBPB patches apply.
…kernel/git/jmorris/linux-security Pull integrity fixes from James Morris: - add James Bottommley as a Trusted Keys maintainer. - IMA: re-initialize iint->atomic_flags on iint_free(), from Mimi. * 'fixes-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: re-initialize iint->atomic_flags maintainers: update trusted keys
…rnel/git/jdelvare/staging Pull dmi subsystem updates/fixes from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: handle missing DMI data gracefully firmware: dmi_scan: Fix handling of empty DMI strings firmware: dmi_scan: Drop dmi_initialized firmware: dmi: Optimize dmi_matches
…el/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Only miscellaneous cleanups and bug fixes for ext4 this cycle" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: create ext4_kset dynamically ext4: create ext4_feat kobject dynamically ext4: release kobject/kset even when init/register fail ext4: fix incorrect indentation of if statement ext4: correct documentation for grpid mount option ext4: use 'sbi' instead of 'EXT4_SB(sb)' ext4: save error to disk in __ext4_grp_locked_error() jbd2: fix sphinx kernel-doc build warnings ext4: fix a race in the ext4 shutdown path mbcache: make sure c_entry_count is not decremented past zero ext4: no need flush workqueue before destroying it ext4: fixed alignment and minor code cleanup in ext4.h ext4: fix ENOSPC handling in DAX page fault handler dax: pass detailed error code from dax_iomap_fault() mbcache: revert "fs/mbcache.c: make count_objects() more robust" mbcache: initialize entry->e_referenced in mb_cache_entry_create() ext4: fix up remaining files with SPDX cleanups
…rnel/git/kees/linux Pull pstore update from Kees Cook: "Only a header cleanup this release; nice and quiet. :) - clean up hardirq header usage (Yang Shi)" * tag 'pstore-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fs: pstore: remove unused hardirq.h
[dwmw2: Stop using KF() for bits in it, too] Signed-off-by: KarimAllah Ahmed <[email protected]> Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Paolo Bonzini <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Cc: [email protected] Cc: Radim Krčmář <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
The Indirect Branch Predictor Barrier (IBPB) is an indirect branch
control mechanism. It keeps earlier branches from influencing
later ones.
Unlike IBRS and STIBP, IBPB does not define a new mode of operation.
It's a command that ensures predicted branch targets aren't used after
the barrier. Although IBRS and IBPB are enumerated by the same CPUID
enumeration, IBPB is very different.
IBPB helps mitigate against three potential attacks:
* Mitigate guests from being attacked by other guests.
- This is addressed by issing IBPB when we do a guest switch.
* Mitigate attacks from guest/ring3->host/ring3.
These would require a IBPB during context switch in host, or after
VMEXIT. The host process has two ways to mitigate
- Either it can be compiled with retpoline
- If its going through context switch, and has set !dumpable then
there is a IBPB in that path.
(Tim's patch: https://patchwork.kernel.org/patch/10192871)
- The case where after a VMEXIT you return back to Qemu might make
Qemu attackable from guest when Qemu isn't compiled with retpoline.
There are issues reported when doing IBPB on every VMEXIT that resulted
in some tsc calibration woes in guest.
* Mitigate guest/ring0->host/ring0 attacks.
When host kernel is using retpoline it is safe against these attacks.
If host kernel isn't using retpoline we might need to do a IBPB flush on
every VMEXIT.
Even when using retpoline for indirect calls, in certain conditions 'ret'
can use the BTB on Skylake-era CPUs. There are other mitigations
available like RSB stuffing/clearing.
* IBPB is issued only for SVM during svm_free_vcpu().
VMX has a vmclear and SVM doesn't. Follow discussion here:
https://lkml.org/lkml/2018/1/15/146
Please refer to the following spec for more details on the enumeration
and control.
Refer here to get documentation about mitigations.
https://software.intel.com/en-us/side-channel-security-support
[peterz: rebase and changelog rewrite]
[karahmed: - rebase
- vmx: expose PRED_CMD if guest has it in CPUID
- svm: only pass through IBPB if guest has it in CPUID
- vmx: support !cpu_has_vmx_msr_bitmap()]
- vmx: support nested]
[dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS)
PRED_CMD is a write-only MSR]
Signed-off-by: Ashok Raj <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: KarimAllah Ahmed <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Konrad Rzeszutek Wilk <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: [email protected]
Cc: Asit Mallick <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Jun Nakajima <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Tim Chen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO (bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the contents will come directly from the hardware, but user-space can still override it. [dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional] Signed-off-by: KarimAllah Ahmed <[email protected]> Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Paolo Bonzini <[email protected]> Reviewed-by: Darren Kenny <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jun Nakajima <[email protected]> Cc: [email protected] Cc: Dave Hansen <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Asit Mallick <[email protected]> Cc: Arjan Van De Ven <[email protected]> Cc: Greg KH <[email protected]> Cc: Dan Williams <[email protected]> Cc: Tim Chen <[email protected]> Cc: Ashok Raj <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
[ Based on a patch from Ashok Raj <[email protected]> ] Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for guests that will only mitigate Spectre V2 through IBRS+IBPB and will not be using a retpoline+IBPB based approach. To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for guests that do not actually use the MSR, only start saving and restoring when a non-zero is written to it. No attempt is made to handle STIBP here, intentionally. Filtering STIBP may be added in a future patch, which may require trapping all writes if we don't want to pass it through directly to the guest. [dwmw2: Clean up CPUID bits, save/restore manually, handle reset] Signed-off-by: KarimAllah Ahmed <[email protected]> Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Darren Kenny <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jun Nakajima <[email protected]> Cc: [email protected] Cc: Dave Hansen <[email protected]> Cc: Tim Chen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Asit Mallick <[email protected]> Cc: Arjan Van De Ven <[email protected]> Cc: Greg KH <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Dan Williams <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Ashok Raj <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
[ Based on a patch from Paolo Bonzini <[email protected]> ] ... basically doing exactly what we do for VMX: - Passthrough SPEC_CTRL to guests (if enabled in guest CPUID) - Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest actually used it. Signed-off-by: KarimAllah Ahmed <[email protected]> Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Darren Kenny <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jun Nakajima <[email protected]> Cc: [email protected] Cc: Dave Hansen <[email protected]> Cc: Tim Chen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Asit Mallick <[email protected]> Cc: Arjan Van De Ven <[email protected]> Cc: Greg KH <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Dan Williams <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Ashok Raj <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
…kernel/git/kees/linux Pull hardened usercopy whitelisting from Kees Cook: "Currently, hardened usercopy performs dynamic bounds checking on slab cache objects. This is good, but still leaves a lot of kernel memory available to be copied to/from userspace in the face of bugs. To further restrict what memory is available for copying, this creates a way to whitelist specific areas of a given slab cache object for copying to/from userspace, allowing much finer granularity of access control. Slab caches that are never exposed to userspace can declare no whitelist for their objects, thereby keeping them unavailable to userspace via dynamic copy operations. (Note, an implicit form of whitelisting is the use of constant sizes in usercopy operations and get_user()/put_user(); these bypass all hardened usercopy checks since these sizes cannot change at runtime.) This new check is WARN-by-default, so any mistakes can be found over the next several releases without breaking anyone's system. The series has roughly the following sections: - remove %p and improve reporting with offset - prepare infrastructure and whitelist kmalloc - update VFS subsystem with whitelists - update SCSI subsystem with whitelists - update network subsystem with whitelists - update process memory with whitelists - update per-architecture thread_struct with whitelists - update KVM with whitelists and fix ioctl bug - mark all other allocations as not whitelisted - update lkdtm for more sensible test overage" * tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (38 commits) lkdtm: Update usercopy tests for whitelisting usercopy: Restrict non-usercopy caches to size 0 kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl kvm: whitelist struct kvm_vcpu_arch arm: Implement thread_struct whitelist for hardened usercopy arm64: Implement thread_struct whitelist for hardened usercopy x86: Implement thread_struct whitelist for hardened usercopy fork: Provide usercopy whitelisting for task_struct fork: Define usercopy region in thread_stack slab caches fork: Define usercopy region in mm_struct slab caches net: Restrict unwhitelisted proto caches to size 0 sctp: Copy struct sctp_sock.autoclose to userspace using put_user() sctp: Define usercopy region in SCTP proto slab cache caif: Define usercopy region in caif proto slab cache ip: Define usercopy region in IP proto slab cache net: Define usercopy region in struct proto slab cache scsi: Define usercopy region in scsi_sense_cache slab cache cifs: Define usercopy region in cifs_request slab cache vxfs: Define usercopy region in vxfs_inode slab cache ufs: Define usercopy region in ufs_inode_cache slab cache ...
This hardware block provides more functionalities that just IPC. Convert it to regmap to allow other child platform devices to use the same regmap. Signed-off-by: Georgi Djakov <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
There is a clock controller functionality provided by the APCS hardware block of msm8916 devices. The device-tree would represent an APCS node with both mailbox and clock provider properties. Create a platform child device for the clock controller functionality so the driver can probe and use APCS as parent. Signed-off-by: Georgi Djakov <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
Update the binding documentation for APCS to mention that the APCS hardware block also expose a clock controller functionality. The APCS clock controller is a mux and half-integer divider. It has the main CPU PLL as an input and provides the clock for the application CPU. Signed-off-by: Georgi Djakov <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
…ernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Refactor support for encrypted symlinks to move common code to fscrypt" Ted also points out about the merge: "This makes the f2fs symlink code use the fscrypt_encrypt_symlink() from the fscrypt tree. This will end up dropping the kzalloc() -> f2fs_kzalloc() change, which means the fscrypt-specific allocation won't get tested by f2fs's kmalloc error injection system; which is fine" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: (26 commits) fscrypt: fix build with pre-4.6 gcc versions fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info() fscrypt: document symlink length restriction fscrypt: fix up fscrypt_fname_encrypted_size() for internal use fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names fscrypt: calculate NUL-padding length in one place only fscrypt: move fscrypt_symlink_data to fscrypt_private.h fscrypt: remove fscrypt_fname_usr_to_disk() ubifs: switch to fscrypt_get_symlink() ubifs: switch to fscrypt ->symlink() helper functions ubifs: free the encrypted symlink target f2fs: switch to fscrypt_get_symlink() f2fs: switch to fscrypt ->symlink() helper functions ext4: switch to fscrypt_get_symlink() ext4: switch to fscrypt ->symlink() helper functions fscrypt: new helper function - fscrypt_get_symlink() fscrypt: new helper functions for ->symlink() fscrypt: trim down fscrypt.h includes fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h ...
…nel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has the following changes for you:
- new flag to mark DMA safe buffers in i2c_msg. Also, some
infrastructure around it. And docs.
- huge refactoring of the at24 driver led by the new maintainer
Bartosz
- update I2C bus recovery to send STOP after recovery
- conversion from gpio to gpiod for I2C bus recovery
- adding a fault-injector to the i2c-gpio driver
- lots of small driver improvements, and bigger ones to
i2c-sh_mobile"
* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
i2c: mv64xxx: Add myself as maintainer for this driver
i2c: mv64xxx: Fix clock resource by adding an optional bus clock
i2c: mv64xxx: Remove useless test before clk_disable_unprepare
i2c: mxs: use true and false for boolean values
i2c: meson: update doc description to fix build warnings
i2c: meson: add configurable divider factors
dt-bindings: i2c: update documentation for the Meson-AXG
i2c: imx-lpi2c: add runtime pm support
i2c: rcar: fix some trivial typos in comments
i2c: davinci: fix the cpufreq transition
i2c: rk3x: add proper kerneldoc header
i2c: rk3x: account for const type of of_device_id.data
i2c: acorn: remove outdated path from file header
i2c: acorn: add MODULE_LICENSE tag
i2c: rcar: implement bus recovery
i2c: send STOP after successful bus recovery
i2c: ensure SDA is released in recovery if SDA is controllable
i2c: add 'set_sda' to bus_recovery_info
i2c: add identifier in declarations for i2c_bus_recovery
i2c: make kerneldoc about bus recovery more precise
...
…ng/fujitsu/integration Pull mailbox updates from Jassi Brar: "Misc driver changes only: - TI-MsgMgr: Fix print format for a printk - TI-MSgMgr: SPDX license switch for the driver - QCOM-IPC: Convert driver to use regmap - QCOM-IPC: Spawn sibling clock device from mailbox driver" * tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: Document the APCS clock binding mailbox: qcom: Create APCS child device for clock controller mailbox: qcom: Convert APCS IPC driver to use regmap mailbox: ti-msgmgr: Use %zu for size_t print format mailbox: ti-msgmgr: Switch to SPDX Licensing
Pull NTB updates from Jon Mason: "Bug fixes galore, removal of the ntb atom driver, and updates to the ntb tools and tests to support the multi-port interface" * tag 'ntb-4.16' of git://github.com/jonmason/ntb: (37 commits) NTB: ntb_perf: fix cast to restricted __le32 ntb_perf: Fix an error code in perf_copy_chunk() ntb_hw_switchtec: Make function switchtec_ntb_remove() static NTB: ntb_tool: fix memory leak on 'buf' on error exit path NTB: ntb_perf: fix printing of resource_size_t NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology NTB: ntb_test: Update ntb_perf tests NTB: ntb_test: Update ntb_tool MW tests NTB: ntb_test: Add ntb_tool Message tests NTB: ntb_test: Update ntb_tool Scratchpad tests NTB: ntb_test: Update ntb_tool DB tests NTB: ntb_test: Update ntb_tool link tests NTB: ntb_test: Add ntb_tool port tests NTB: ntb_test: Safely use paths with whitespace NTB: ntb_perf: Add full multi-port NTB API support NTB: ntb_tool: Add full multi-port NTB API support NTB: ntb_pp: Add full multi-port NTB API support NTB: Fix UB/bug in ntb_mw_get_align() NTB: Set dma mask and dma coherent mask to NTB devices NTB: Rename NTB messaging API methods ...
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
…inux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two small changes:
- a fix for a interrupt regression caused by the vector management
changes in 4.15 affecting museum pieces which rely on interrupt
probing for legacy (e.g. parallel port) devices.
One of the startup calls in the autoprobe code was not changed to
the new activate_and_startup() function resulting in a warning and
as a consequence failing to discover the device interrupt.
- a trivial update to the copyright/license header of the STM32 irq
chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Make legacy autoprobing work again
irqchip/stm32: Fix copyright
…inux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of changes:
- a fixup for kexec related to 5-level paging mode. That covers most
of the cases except kexec from a 5-level kernel to a 4-level
kernel. The latter needs more work and is going to come in 4.17
- two trivial fixes for build warnings triggered by LTO and gcc-8"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/power: Fix swsusp_arch_resume prototype
x86/dumpstack: Avoid uninitlized variable
x86/kexec: Make kexec (mostly) work in 5-level paging mode
…x/kernel/git/tip/tip
Pull spectre/meltdown updates from Thomas Gleixner:
"The next round of updates related to melted spectrum:
- The initial set of spectre V1 mitigations:
- Array index speculation blocker and its usage for syscall,
fdtable and the n180211 driver.
- Speculation barrier and its usage in user access functions
- Make indirect calls in KVM speculation safe
- Blacklisting of known to be broken microcodes so IPBP/IBSR are not
touched.
- The initial IBPB support and its usage in context switch
- The exposure of the new speculation MSRs to KVM guests.
- A fix for a regression in x86/32 related to the cpu entry area
- Proper whitelisting for known to be safe CPUs from the mitigations.
- objtool fixes to deal proper with retpolines and alternatives
- Exclude __init functions from retpolines which speeds up the boot
process.
- Removal of the syscall64 fast path and related cleanups and
simplifications
- Removal of the unpatched paravirt mode which is yet another source
of indirect unproteced calls.
- A new and undisputed version of the module mismatch warning
- A couple of cleanup and correctness fixes all over the place
Yet another step towards full mitigation. There are a few things still
missing like the RBS underflow mitigation for Skylake and other small
details, but that's being worked on.
That said, I'm taking a belated christmas vacation for a week and hope
that everything is magically solved when I'm back on Feb 12th"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
KVM/x86: Add IBPB support
KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX
x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
x86/pti: Mark constant arrays as __initconst
x86/spectre: Simplify spectre_v2 command line parsing
x86/retpoline: Avoid retpolines for built-in __init functions
x86/kvm: Update spectre-v1 mitigation
KVM: VMX: make MSR bitmaps per-VCPU
x86/paravirt: Remove 'noreplace-paravirt' cmdline option
x86/speculation: Use Indirect Branch Prediction Barrier in context switch
x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel
x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable"
x86/spectre: Report get_user mitigation for spectre_v1
nl80211: Sanitize array index in parse_txq_params
vfs, fdtable: Prevent bounds-check bypass via speculative execution
x86/syscall: Sanitize syscall table de-references under speculation
x86/get_user: Use pointer masking to limit speculation
...
Esteban-Rocha
pushed a commit
that referenced
this pull request
Apr 22, 2018
Patch series "kexec_file, x86, powerpc: refactoring for other architecutres", v2. This is a preparatory patchset for adding kexec_file support on arm64. It was originally included in a arm64 patch set[1], but Philipp is also working on their kexec_file support on s390[2] and some changes are now conflicting. So these common parts were extracted and put into a separate patch set for better integration. What's more, my original patch#4 was split into a few small chunks for easier review after Dave's comment. As such, the resulting code is basically identical with my original, and the only *visible* differences are: - renaming of _kexec_kernel_image_probe() and _kimage_file_post_load_cleanup() - change one of types of arguments at prepare_elf64_headers() Those, unfortunately, require a couple of trivial changes on the rest (#1, #6 to #13) of my arm64 kexec_file patch set[1]. Patch #1 allows making a use of purgatory optional, particularly useful for arm64. Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load, verify_sig}() and arch_kimage_file_post_load_cleanup() across architectures. Patches #3-#7 are also intended to generalize parse_elf64_headers(), along with exclude_mem_range(), to be made best re-use of. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html [2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html This patch (of 7): On arm64, crash dump kernel's usable memory is protected by *unmapping* it from kernel virtual space unlike other architectures where the region is just made read-only. It is highly unlikely that the region is accidentally corrupted and this observation rationalizes that digest check code can also be dropped from purgatory. The resulting code is so simple as it doesn't require a bit ugly re-linking/relocation stuff, i.e. arch_kexec_apply_relocations_add(). Please see: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html All that the purgatory does is to shuffle arguments and jump into a new kernel, while we still need to have some space for a hash value (purgatory_sha256_digest) which is never checked against. As such, it doesn't make sense to have trampline code between old kernel and new kernel on arm64. This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and allows related code to be compiled in only if necessary. [[email protected]: fix trivial screwup] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: AKASHI Takahiro <[email protected]> Acked-by: Dave Young <[email protected]> Tested-by: Dave Young <[email protected]> Cc: Vivek Goyal <[email protected]> Cc: Baoquan He <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.