Skip to content

Latest commit

 

History

History
75 lines (59 loc) · 2.06 KB

fpv-sigmastar.md

File metadata and controls

75 lines (59 loc) · 2.06 KB

OpenIPC Wiki

Table of Content

Instructions for installing OpenIPC firmware on SigmaStar devices

Logo


SSC338Q + IMX415 + NAND flash, board from CamHi vendor

Quick note on experiments, will be revised and updated

Summary

The Sigmastar IPL (pre-bootloader) allows to boot a custom U-Boot from the sdcard. With this temporary OpenIPC firmware you can create a backup of the nand and flash the permanent firmware afterwards.

Prepare

  • Connect your sdcard to your computer, create a 1 GB partition and format it as FAT32 / VFAT.
  • Download ssc338q-initramfs.zip
  • Copy all files to the root directory of the sdcard, update your wireless credentials on autostart.sh:
#!/bin/sh
+WLAN_SSID="Router"
+WLAN_PASS="12345678"
  • Put the sdcard into the camera module, start it and wait until it connects to your router.
  • Use ssh to connect to the camera:

Backup

  • /dev/mtd0 uses the complete partition size of the nand flash.
  • This might take some time, the backup to the sdcard is rather slow.
nanddump -f /mnt/mmcblk0p1/backup-nand.bin /dev/mtd0
  • Alternatively the flash content can be uploaded via tftp.
cd /dev
tftp 192.168.1.10 -pr mtd0

Install

flash_eraseall /dev/mtd0
nandwrite -k /dev/mtd0 /mnt/mmcblk0p1/ssc338q-fpv.bin
rm /mnt/mmcblk0p1/UBOOT
reboot -f

Buying a device (CamHi vendor)


SSC338Q + IMX415 + NOR flash, board from Anjoy vendor

Information collection continues

Information collection continues

Buying a device (Anjoy vendor)


Other notes

For testing please use the MPV player, in which the Shift+I key combination can be used to get debugging information.