Skip to content

Latest commit

 

History

History
69 lines (42 loc) · 2.79 KB

README.md

File metadata and controls

69 lines (42 loc) · 2.79 KB

librespot-snapserver

Run a Snapcast server with Spotify support as a Docker container.

This is a multi-arch image currently working on the amd64 and armhf platforms. This means you can use the same image regardless of platform.

Note: You need a Spotify premium account.

Usage

Run it like this (on your PC or ARM-based device):

docker run -d --name snapserver --net host -e DEVICE_NAME=Snapcast mazzolino/librespot-snapserver

That will make the device available to all Spotify clients in your network. Add your Spotify credentials in order to limit control to clients logged in with your account:

docker run -d --name snapserver --net host -e DEVICE_NAME=Snapcast -e USERNAME=my-spotify-username -e PASSWORD=my-spotify-password mazzolino/librespot-snapserver

Now you can connect your snapclient to your host's ip. The receiver should show up in Spotify under the DEVICE_NAME given above (e.g. Snapcast). Have fun playing music!

Login problems?

It might be necessary to get a credentials file instead of using username and password. See this issue for more details.

  1. Use this tool to get the file credentials.json.

  2. Mount it into your container and use the CACHE option, like this:

    docker run -d --name snapserver --net host -e DEVICE_NAME=Snapcast -e CACHE=/data -v /path/to/credentials.json:/data/credentials.json mazzolino/librespot-snapserver

Custom configuration

If you want to configure the snapcast server differently, you can mount your own snapserver.conf into the container:

docker run -d --name snapserver --net host -v /path/to/your/snapserver.conf:/etc/snapserver.conf:ro mazzolino/librespot-snapserver

NOTE: The configuration file needs to be mounted read-only for this to work.

Make sure to include a Spotify source in your configuration, like this:

[stream]
source = librespot:///librespot?name=Spotify&devicename=DEVICE_NAME&bitrate=320&volume=100&username=USERNAME&password=PASSWORD

(Replace DEVICE_NAME, USERNAME and PASSWORD accordingly.)

Building the images

In order to build images for the non-amd64 architectures, you need to build on amd64 machine and enable qemu binfmt support. The easiest way for this is to run:

docker run --privileged --rm tonistiigi/binfmt --install all

The following command will build the images for all supported architectures. Replace my/image with your own image name:

docker buildx build --platform=linux/amd64,linux/arm/v7,linux/arm64 -t my/image --load .

To build only an image for the current architecture, run:

docker buildx build -t my/image --load .