diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt
index 8a39ce45d8a01c..008ecb588317bc 100644
--- a/Documentation/power/states.txt
+++ b/Documentation/power/states.txt
@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 9b6cebe227a085..54abb26b736639 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -674,14 +674,6 @@ static void acpi_sleep_suspend_setup(void)
 		if (acpi_sleep_state_supported(i))
 			sleep_states[i] = 1;
 
-	/*
-	 * Use suspend-to-idle by default if ACPI_FADT_LOW_POWER_S0 is set and
-	 * the default suspend mode was not selected from the command line.
-	 */
-	if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0 &&
-	    mem_sleep_default > PM_SUSPEND_MEM)
-		mem_sleep_default = PM_SUSPEND_FREEZE;
-
 	suspend_set_ops(old_suspend_ordering ?
 		&acpi_suspend_ops_old : &acpi_suspend_ops);
 	freeze_set_ops(&acpi_freeze_ops);
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index f91c25718d164c..a54d65aa776d06 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -2005,7 +2005,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 			limits = &performance_limits;
 			perf_limits = limits;
 		}
-		if (policy->max >= policy->cpuinfo.max_freq) {
+		if (policy->max >= policy->cpuinfo.max_freq &&
+		    !limits->no_turbo) {
 			pr_debug("set performance\n");
 			intel_pstate_set_performance_limits(perf_limits);
 			goto out;
@@ -2047,6 +2048,17 @@ static int intel_pstate_verify_policy(struct cpufreq_policy *policy)
 	    policy->policy != CPUFREQ_POLICY_PERFORMANCE)
 		return -EINVAL;
 
+	/* When per-CPU limits are used, sysfs limits are not used */
+	if (!per_cpu_limits) {
+		unsigned int max_freq, min_freq;
+
+		max_freq = policy->cpuinfo.max_freq *
+						limits->max_sysfs_pct / 100;
+		min_freq = policy->cpuinfo.max_freq *
+						limits->min_sysfs_pct / 100;
+		cpufreq_verify_within_limits(policy, min_freq, max_freq);
+	}
+
 	return 0;
 }
 
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 0c729c3c85499a..d9718378a8bee0 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -194,8 +194,6 @@ struct platform_freeze_ops {
 };
 
 #ifdef CONFIG_SUSPEND
-extern suspend_state_t mem_sleep_default;
-
 /**
  * suspend_set_ops - set platform dependent suspend operations
  * @ops: The new suspend operations to set.
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index f67ceb7768b82a..15e6baef5c73f9 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -46,7 +46,7 @@ static const char * const mem_sleep_labels[] = {
 const char *mem_sleep_states[PM_SUSPEND_MAX];
 
 suspend_state_t mem_sleep_current = PM_SUSPEND_FREEZE;
-suspend_state_t mem_sleep_default = PM_SUSPEND_MAX;
+static suspend_state_t mem_sleep_default = PM_SUSPEND_MEM;
 
 unsigned int pm_suspend_global_flags;
 EXPORT_SYMBOL_GPL(pm_suspend_global_flags);
@@ -168,7 +168,7 @@ void suspend_set_ops(const struct platform_suspend_ops *ops)
 	}
 	if (valid_state(PM_SUSPEND_MEM)) {
 		mem_sleep_states[PM_SUSPEND_MEM] = mem_sleep_labels[PM_SUSPEND_MEM];
-		if (mem_sleep_default >= PM_SUSPEND_MEM)
+		if (mem_sleep_default == PM_SUSPEND_MEM)
 			mem_sleep_current = PM_SUSPEND_MEM;
 	}