forked from plbossart/sound
-
Notifications
You must be signed in to change notification settings - Fork 0
/
pm2301_charger.c
1269 lines (1038 loc) · 29.7 KB
/
pm2301_charger.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
* Copyright 2012 ST Ericsson.
*
* Power supply driver for ST Ericsson pm2xxx_charger charger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/pm2301_charger.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>
#include <linux/pm.h>
#include "pm2301_charger.h"
#define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
struct pm2xxx_charger, ac_chg)
#define SLEEP_MIN 50
#define SLEEP_MAX 100
#define PM2XXX_AUTOSUSPEND_DELAY 500
static int pm2xxx_interrupt_registers[] = {
PM2XXX_REG_INT1,
PM2XXX_REG_INT2,
PM2XXX_REG_INT3,
PM2XXX_REG_INT4,
PM2XXX_REG_INT5,
PM2XXX_REG_INT6,
};
static enum power_supply_property pm2xxx_charger_ac_props[] = {
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
};
static int pm2xxx_charger_voltage_map[] = {
3500,
3525,
3550,
3575,
3600,
3625,
3650,
3675,
3700,
3725,
3750,
3775,
3800,
3825,
3850,
3875,
3900,
3925,
3950,
3975,
4000,
4025,
4050,
4075,
4100,
4125,
4150,
4175,
4200,
4225,
4250,
4275,
4300,
};
static int pm2xxx_charger_current_map[] = {
200,
200,
400,
600,
800,
1000,
1200,
1400,
1600,
1800,
2000,
2200,
2400,
2600,
2800,
3000,
};
static const struct i2c_device_id pm2xxx_ident[] = {
{ "pm2301", 0 },
{ }
};
static void set_lpn_pin(struct pm2xxx_charger *pm2)
{
if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) {
gpio_set_value(pm2->lpn_pin, 1);
usleep_range(SLEEP_MIN, SLEEP_MAX);
}
}
static void clear_lpn_pin(struct pm2xxx_charger *pm2)
{
if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin))
gpio_set_value(pm2->lpn_pin, 0);
}
static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
{
int ret;
/* wake up the device */
pm_runtime_get_sync(pm2->dev);
ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
1, val);
if (ret < 0)
dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
else
ret = 0;
pm_runtime_put_sync(pm2->dev);
return ret;
}
static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
{
int ret;
/* wake up the device */
pm_runtime_get_sync(pm2->dev);
ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
1, &val);
if (ret < 0)
dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
else
ret = 0;
pm_runtime_put_sync(pm2->dev);
return ret;
}
static int pm2xxx_charging_enable_mngt(struct pm2xxx_charger *pm2)
{
int ret;
/* Enable charging */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
(PM2XXX_CH_AUTO_RESUME_EN | PM2XXX_CHARGER_ENA));
return ret;
}
static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
{
int ret;
/* Disable SW EOC ctrl */
ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, PM2XXX_SWCTRL_HW);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
return ret;
}
/* Disable charging */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
(PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
return ret;
}
return 0;
}
static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
{
queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
return 0;
}
static int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
{
queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
return 0;
}
static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
{
dev_err(pm2->dev, "Overvoltage detected\n");
pm2->flags.ovv = true;
power_supply_changed(&pm2->ac_chg.psy);
/* Schedule a new HW failure check */
queue_delayed_work(pm2->charger_wq, &pm2->check_hw_failure_work, 0);
return 0;
}
static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
{
dev_dbg(pm2->dev , "20 minutes watchdog expired\n");
pm2->ac.wd_expired = true;
power_supply_changed(&pm2->ac_chg.psy);
return 0;
}
static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
{
int ret;
switch (val) {
case PM2XXX_INT1_ITVBATLOWR:
dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
/* Enable SW EOC ctrl */
ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
PM2XXX_SWCTRL_SW);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
return ret;
}
break;
case PM2XXX_INT1_ITVBATLOWF:
dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
/* Disable SW EOC ctrl */
ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
PM2XXX_SWCTRL_HW);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
return ret;
}
break;
default:
dev_err(pm2->dev, "Unknown VBAT level\n");
}
return 0;
}
static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
{
dev_dbg(pm2->dev, "battery disconnected\n");
return 0;
}
static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
{
int ret;
ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val);
if (ret < 0) {
dev_err(pm2->dev, "Charger detection failed\n");
goto out;
}
*val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG);
out:
return ret;
}
static int pm2xxx_charger_itv_pwr_plug_mngt(struct pm2xxx_charger *pm2, int val)
{
int ret;
u8 read_val;
/*
* Since we can't be sure that the events are received
* synchronously, we have the check if the main charger is
* connected by reading the interrupt source register.
*/
ret = pm2xxx_charger_detection(pm2, &read_val);
if ((ret == 0) && read_val) {
pm2->ac.charger_connected = 1;
pm2->ac_conn = true;
queue_work(pm2->charger_wq, &pm2->ac_work);
}
return ret;
}
static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
int val)
{
pm2->ac.charger_connected = 0;
queue_work(pm2->charger_wq, &pm2->ac_work);
return 0;
}
static int pm2_int_reg0(void *pm2_data, int val)
{
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
if (val & PM2XXX_INT1_ITVBATLOWR) {
ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
PM2XXX_INT1_ITVBATLOWR);
if (ret < 0)
goto out;
}
if (val & PM2XXX_INT1_ITVBATLOWF) {
ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
PM2XXX_INT1_ITVBATLOWF);
if (ret < 0)
goto out;
}
if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
ret = pm2xxx_charger_bat_disc_mngt(pm2,
PM2XXX_INT1_ITVBATDISCONNECT);
if (ret < 0)
goto out;
}
out:
return ret;
}
static int pm2_int_reg1(void *pm2_data, int val)
{
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
dev_dbg(pm2->dev , "Main charger plugged\n");
ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
(PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
}
if (val &
(PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
dev_dbg(pm2->dev , "Main charger unplugged\n");
ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
(PM2XXX_INT2_ITVPWR1UNPLUG |
PM2XXX_INT2_ITVPWR2UNPLUG));
}
return ret;
}
static int pm2_int_reg2(void *pm2_data, int val)
{
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
dev_dbg(pm2->dev,
"Watchdog occurred for precharge, CC and CV charge\n");
}
return ret;
}
static int pm2_int_reg3(void *pm2_data, int val)
{
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
if (val & (PM2XXX_INT4_ITCHARGINGON)) {
dev_dbg(pm2->dev ,
"chargind operation has started\n");
}
if (val & (PM2XXX_INT4_ITVRESUME)) {
dev_dbg(pm2->dev,
"battery discharged down to VResume threshold\n");
}
if (val & (PM2XXX_INT4_ITBATTFULL)) {
dev_dbg(pm2->dev , "battery fully detected\n");
}
if (val & (PM2XXX_INT4_ITCVPHASE)) {
dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
}
if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
pm2->failure_case = VPWR_OVV;
ret = pm2xxx_charger_ovv_mngt(pm2, val &
(PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
}
if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
PM2XXX_INT4_S_ITBATTEMPHOT)) {
ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
(PM2XXX_INT4_S_ITBATTEMPCOLD |
PM2XXX_INT4_S_ITBATTEMPHOT));
dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
}
return ret;
}
static int pm2_int_reg4(void *pm2_data, int val)
{
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
pm2->failure_case = VSYSTEM_OVV;
ret = pm2xxx_charger_ovv_mngt(pm2, val &
PM2XXX_INT5_ITVSYSTEMOVV);
dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
}
if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
PM2XXX_INT5_ITTHERMALWARNINGRISE |
PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
ret = pm2xxx_charger_die_therm_mngt(pm2, val &
(PM2XXX_INT5_ITTHERMALWARNINGFALL |
PM2XXX_INT5_ITTHERMALWARNINGRISE |
PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
PM2XXX_INT5_ITTHERMALSHUTDOWNRISE));
}
return ret;
}
static int pm2_int_reg5(void *pm2_data, int val)
{
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
}
if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
PM2XXX_INT6_ITVPWR1VALIDRISE |
PM2XXX_INT6_ITVPWR2VALIDFALL |
PM2XXX_INT6_ITVPWR1VALIDFALL)) {
dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
}
return ret;
}
static irqreturn_t pm2xxx_irq_int(int irq, void *data)
{
struct pm2xxx_charger *pm2 = data;
struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
int i;
/* wake up the device */
pm_runtime_get_sync(pm2->dev);
do {
for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
pm2xxx_reg_read(pm2,
pm2xxx_interrupt_registers[i],
&(interrupt->reg[i]));
if (interrupt->reg[i] > 0)
interrupt->handler[i](pm2, interrupt->reg[i]);
}
} while (gpio_get_value(pm2->pdata->gpio_irq_number) == 0);
pm_runtime_mark_last_busy(pm2->dev);
pm_runtime_put_autosuspend(pm2->dev);
return IRQ_HANDLED;
}
static int pm2xxx_charger_get_ac_cv(struct pm2xxx_charger *pm2)
{
int ret = 0;
u8 val;
if (pm2->ac.charger_connected && pm2->ac.charger_online) {
ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
goto out;
}
if (val & PM2XXX_INT4_S_ITCVPHASE)
ret = PM2XXX_CONST_VOLT;
else
ret = PM2XXX_CONST_CURR;
}
out:
return ret;
}
static int pm2xxx_current_to_regval(int curr)
{
int i;
if (curr < pm2xxx_charger_current_map[0])
return 0;
for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_current_map); i++) {
if (curr < pm2xxx_charger_current_map[i])
return (i - 1);
}
i = ARRAY_SIZE(pm2xxx_charger_current_map) - 1;
if (curr == pm2xxx_charger_current_map[i])
return i;
else
return -EINVAL;
}
static int pm2xxx_voltage_to_regval(int curr)
{
int i;
if (curr < pm2xxx_charger_voltage_map[0])
return 0;
for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_voltage_map); i++) {
if (curr < pm2xxx_charger_voltage_map[i])
return i - 1;
}
i = ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1;
if (curr == pm2xxx_charger_voltage_map[i])
return i;
else
return -EINVAL;
}
static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
int ich_out)
{
int ret;
int curr_index;
struct pm2xxx_charger *pm2;
u8 val;
if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
pm2 = to_pm2xxx_charger_ac_device_info(charger);
else
return -ENXIO;
curr_index = pm2xxx_current_to_regval(ich_out);
if (curr_index < 0) {
dev_err(pm2->dev,
"Charger current too high, charging not started\n");
return -ENXIO;
}
ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
if (ret >= 0) {
val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
val |= curr_index;
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
if (ret < 0) {
dev_err(pm2->dev,
"%s write failed\n", __func__);
}
}
else
dev_err(pm2->dev, "%s read failed\n", __func__);
return ret;
}
static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct pm2xxx_charger *pm2;
pm2 = to_pm2xxx_charger_ac_device_info(psy_to_ux500_charger(psy));
switch (psp) {
case POWER_SUPPLY_PROP_HEALTH:
if (pm2->flags.mainextchnotok)
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
else if (pm2->ac.wd_expired)
val->intval = POWER_SUPPLY_HEALTH_DEAD;
else if (pm2->flags.main_thermal_prot)
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
else if (pm2->flags.ovv)
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
else
val->intval = POWER_SUPPLY_HEALTH_GOOD;
break;
case POWER_SUPPLY_PROP_ONLINE:
val->intval = pm2->ac.charger_online;
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = pm2->ac.charger_connected;
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
pm2->ac.cv_active = pm2xxx_charger_get_ac_cv(pm2);
val->intval = pm2->ac.cv_active;
break;
default:
return -EINVAL;
}
return 0;
}
static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
{
int ret = 0;
/* enable CC and CV watchdog */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG3,
(PM2XXX_CH_WD_CV_PHASE_60MIN | PM2XXX_CH_WD_CC_PHASE_60MIN));
if( ret < 0)
return ret;
/* enable precharge watchdog */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
PM2XXX_CH_WD_PRECH_PHASE_60MIN);
/* Disable auto timeout */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
/*
* EOC current level = 100mA
* Precharge current level = 100mA
* CC current level = 1000mA
*/
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
(PM2XXX_DIR_CH_CC_CURRENT_1000MA |
PM2XXX_CH_PRECH_CURRENT_100MA |
PM2XXX_CH_EOC_CURRENT_100MA));
/*
* recharge threshold = 3.8V
* Precharge to CC threshold = 2.9V
*/
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
(PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
/* float voltage charger level = 4.2V */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
PM2XXX_CH_VOLT_4_2);
/* Voltage drop between VBAT and VSYS in HW charging = 300mV */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
(PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
PM2XXX_CH_CC_MODEDROP_DIS));
/* Input charger level of over voltage = 10V */
ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
PM2XXX_VPWR2_OVV_10);
ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
PM2XXX_VPWR1_OVV_10);
/* Input charger drop */
ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
(PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
PM2XXX_VPWR2_DROP_DIS));
ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
(PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
PM2XXX_VPWR1_DROP_DIS));
/* Disable battery low monitoring */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
PM2XXX_VBAT_LOW_MONITORING_ENA);
return ret;
}
static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
int enable, int vset, int iset)
{
int ret;
int volt_index;
int curr_index;
u8 val;
struct pm2xxx_charger *pm2 = to_pm2xxx_charger_ac_device_info(charger);
if (enable) {
if (!pm2->ac.charger_connected) {
dev_dbg(pm2->dev, "AC charger not connected\n");
return -ENXIO;
}
dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset);
if (!pm2->vddadc_en_ac) {
ret = regulator_enable(pm2->regu);
if (ret)
dev_warn(pm2->dev,
"Failed to enable vddadc regulator\n");
else
pm2->vddadc_en_ac = true;
}
ret = pm2xxx_charging_init(pm2);
if (ret < 0) {
dev_err(pm2->dev, "%s charging init failed\n",
__func__);
goto error_occured;
}
volt_index = pm2xxx_voltage_to_regval(vset);
curr_index = pm2xxx_current_to_regval(iset);
if (volt_index < 0 || curr_index < 0) {
dev_err(pm2->dev,
"Charger voltage or current too high, "
"charging not started\n");
return -ENXIO;
}
ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
goto error_occured;
}
val &= ~PM2XXX_CH_VOLT_MASK;
val |= volt_index;
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
goto error_occured;
}
ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
goto error_occured;
}
val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
val |= curr_index;
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
goto error_occured;
}
if (!pm2->bat->enable_overshoot) {
ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx read failed\n",
__func__);
goto error_occured;
}
val |= PM2XXX_ANTI_OVERSHOOT_EN;
ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx write failed\n",
__func__);
goto error_occured;
}
}
ret = pm2xxx_charging_enable_mngt(pm2);
if (ret < 0) {
dev_err(pm2->dev, "Failed to enable"
"pm2xxx ac charger\n");
goto error_occured;
}
pm2->ac.charger_online = 1;
} else {
pm2->ac.charger_online = 0;
pm2->ac.wd_expired = false;
/* Disable regulator if enabled */
if (pm2->vddadc_en_ac) {
regulator_disable(pm2->regu);
pm2->vddadc_en_ac = false;
}
ret = pm2xxx_charging_disable_mngt(pm2);
if (ret < 0) {
dev_err(pm2->dev, "failed to disable"
"pm2xxx ac charger\n");
goto error_occured;
}
dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n");
}
power_supply_changed(&pm2->ac_chg.psy);
error_occured:
return ret;
}
static int pm2xxx_charger_watchdog_kick(struct ux500_charger *charger)
{
int ret;
struct pm2xxx_charger *pm2;
if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
pm2 = to_pm2xxx_charger_ac_device_info(charger);
else
return -ENXIO;
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_WD_KICK, WD_TIMER);
if (ret)
dev_err(pm2->dev, "Failed to kick WD!\n");
return ret;
}
static void pm2xxx_charger_ac_work(struct work_struct *work)
{
struct pm2xxx_charger *pm2 = container_of(work,
struct pm2xxx_charger, ac_work);
power_supply_changed(&pm2->ac_chg.psy);
sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
};
static void pm2xxx_charger_check_hw_failure_work(struct work_struct *work)
{
u8 reg_value;
struct pm2xxx_charger *pm2 = container_of(work,
struct pm2xxx_charger, check_hw_failure_work.work);
if (pm2->flags.ovv) {
pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, ®_value);
if (!(reg_value & (PM2XXX_INT4_S_ITVPWR1OVV |
PM2XXX_INT4_S_ITVPWR2OVV))) {
pm2->flags.ovv = false;
power_supply_changed(&pm2->ac_chg.psy);
}
}
/* If we still have a failure, schedule a new check */
if (pm2->flags.ovv) {
queue_delayed_work(pm2->charger_wq,
&pm2->check_hw_failure_work, round_jiffies(HZ));
}
}
static void pm2xxx_charger_check_main_thermal_prot_work(
struct work_struct *work)
{
int ret;
u8 val;
struct pm2xxx_charger *pm2 = container_of(work, struct pm2xxx_charger,
check_main_thermal_prot_work);
/* Check if die temp warning is still active */
ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT5, &val);
if (ret < 0) {
dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
return;
}
if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGRISE
| PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE))
pm2->flags.main_thermal_prot = true;
else if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGFALL
| PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL))
pm2->flags.main_thermal_prot = false;
power_supply_changed(&pm2->ac_chg.psy);
}
static struct pm2xxx_interrupts pm2xxx_int = {
.handler[0] = pm2_int_reg0,
.handler[1] = pm2_int_reg1,
.handler[2] = pm2_int_reg2,
.handler[3] = pm2_int_reg3,
.handler[4] = pm2_int_reg4,
.handler[5] = pm2_int_reg5,
};
static struct pm2xxx_irq pm2xxx_charger_irq[] = {
{"PM2XXX_IRQ_INT", pm2xxx_irq_int},
};
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int pm2xxx_wall_charger_resume(struct device *dev)
{
struct i2c_client *i2c_client = to_i2c_client(dev);
struct pm2xxx_charger *pm2;
pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
set_lpn_pin(pm2);
/* If we still have a HW failure, schedule a new check */
if (pm2->flags.ovv)
queue_delayed_work(pm2->charger_wq,
&pm2->check_hw_failure_work, 0);
return 0;
}
static int pm2xxx_wall_charger_suspend(struct device *dev)
{
struct i2c_client *i2c_client = to_i2c_client(dev);
struct pm2xxx_charger *pm2;
pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
clear_lpn_pin(pm2);
/* Cancel any pending HW failure check */
if (delayed_work_pending(&pm2->check_hw_failure_work))
cancel_delayed_work(&pm2->check_hw_failure_work);
flush_work(&pm2->ac_work);
flush_work(&pm2->check_main_thermal_prot_work);
return 0;
}
#endif
#ifdef CONFIG_PM_RUNTIME
static int pm2xxx_runtime_suspend(struct device *dev)
{
struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
struct pm2xxx_charger *pm2;
pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
clear_lpn_pin(pm2);
return 0;
}
static int pm2xxx_runtime_resume(struct device *dev)
{
struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
struct pm2xxx_charger *pm2;
pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
if (gpio_is_valid(pm2->lpn_pin) && gpio_get_value(pm2->lpn_pin) == 0)
set_lpn_pin(pm2);
return 0;
}
#endif
static const struct dev_pm_ops pm2xxx_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm2xxx_wall_charger_suspend,
pm2xxx_wall_charger_resume)
SET_RUNTIME_PM_OPS(pm2xxx_runtime_suspend, pm2xxx_runtime_resume, NULL)
};
#define PM2XXX_PM_OPS (&pm2xxx_pm_ops)
#else
#define PM2XXX_PM_OPS NULL
#endif
static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
struct pm2xxx_charger *pm2;
int ret = 0;
u8 val;
int i;