From bb2726b52f2abdf46339a2d1293f76b5d5752705 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 7 Oct 2015 06:22:24 -0700 Subject: [PATCH 1/7] Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status" This reverts commit c55d7a0553643a7e8f120688b82b594471084d3c. Without reverting this commit we get "unbalanced disables for pbias_mmc_omap4" errors on omap4430. It seems that 4430 and 4460 behave in a different way for the PBIAS regulator registers and until that has been debugged further we cannot rely on the regulator status registers in hardare on 4430. Fixes: 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") Cc: Felipe Balbi Cc: Kishon Vijay Abraham I Cc: Nishanth Menon Cc: Russell King Signed-off-by: Tony Lindgren Tested-by: Russell King Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap_hsmmc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 781e4db317671c..ae3a2b902ad666 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -182,6 +182,7 @@ struct omap_hsmmc_host { struct clk *fclk; struct clk *dbclk; struct regulator *pbias; + bool pbias_enabled; void __iomem *base; int vqmmc_enabled; resource_size_t mapbase; @@ -328,20 +329,22 @@ static int omap_hsmmc_set_pbias(struct omap_hsmmc_host *host, bool power_on, return ret; } - if (!regulator_is_enabled(host->pbias)) { + if (host->pbias_enabled == 0) { ret = regulator_enable(host->pbias); if (ret) { dev_err(host->dev, "pbias reg enable fail\n"); return ret; } + host->pbias_enabled = 1; } } else { - if (regulator_is_enabled(host->pbias)) { + if (host->pbias_enabled == 1) { ret = regulator_disable(host->pbias); if (ret) { dev_err(host->dev, "pbias reg disable fail\n"); return ret; } + host->pbias_enabled = 0; } } @@ -2053,6 +2056,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) host->base = base + pdata->reg_offset; host->power_mode = MMC_POWER_OFF; host->next_data.cookie = 1; + host->pbias_enabled = 0; host->vqmmc_enabled = 0; ret = omap_hsmmc_gpio_init(mmc, host, pdata); From 123e20b14530b57bd75e295961d2c1f8c48455bf Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 7 Oct 2015 06:22:25 -0700 Subject: [PATCH 2/7] mmc: host: omap_hsmmc: Fix MMC for omap3 legacy booting Starting with commit 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") MMC on omap3 stopped working for legacy booting. This is because legacy booting sets up some of the resource in the platform init code, and for optional regulators always seem to return -EPROBE_DEFER for the legacy booting. Let's fix the issue by checking for device tree based booting for now. Then when omap3 boots in device tree only mode, this patch can be just reverted. Fixes: 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") Cc: Felipe Balbi Cc: Kishon Vijay Abraham I Cc: Nishanth Menon Cc: Russell King Signed-off-by: Tony Lindgren Tested-by: Russell King Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap_hsmmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index ae3a2b902ad666..7fb0753abe3041 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -478,7 +478,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) mmc->supply.vmmc = devm_regulator_get_optional(host->dev, "vmmc"); if (IS_ERR(mmc->supply.vmmc)) { ret = PTR_ERR(mmc->supply.vmmc); - if (ret != -ENODEV) + if ((ret != -ENODEV) && host->dev->of_node) return ret; dev_dbg(host->dev, "unable to get vmmc regulator %ld\n", PTR_ERR(mmc->supply.vmmc)); @@ -493,7 +493,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) mmc->supply.vqmmc = devm_regulator_get_optional(host->dev, "vmmc_aux"); if (IS_ERR(mmc->supply.vqmmc)) { ret = PTR_ERR(mmc->supply.vqmmc); - if (ret != -ENODEV) + if ((ret != -ENODEV) && host->dev->of_node) return ret; dev_dbg(host->dev, "unable to get vmmc_aux regulator %ld\n", PTR_ERR(mmc->supply.vqmmc)); @@ -503,7 +503,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) host->pbias = devm_regulator_get_optional(host->dev, "pbias"); if (IS_ERR(host->pbias)) { ret = PTR_ERR(host->pbias); - if (ret != -ENODEV) + if ((ret != -ENODEV) && host->dev->of_node) return ret; dev_dbg(host->dev, "unable to get pbias regulator %ld\n", PTR_ERR(host->pbias)); From 5de76bfcb1e5ac66c57b99e8e193dacac7416f0e Mon Sep 17 00:00:00 2001 From: Nadav Haklai Date: Tue, 6 Oct 2015 03:22:35 +0200 Subject: [PATCH 3/7] mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driver shci-pxav3 driver is enabling by default the SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN quirk. However this quirk is not required for Armada 38x and leads to wrong clock setting in the divider. Signed-off-by: Nadav Haklai Signed-off-by: Marcin Wojtas Cc: # v4.2 Reviewed-by: Gregory CLEMENT Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pxav3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 946d37f94a31b2..976cddd6d1571b 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -135,6 +135,7 @@ static int armada_38x_quirks(struct platform_device *pdev, struct sdhci_pxa *pxa = pltfm_host->priv; struct resource *res; + host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; host->quirks |= SDHCI_QUIRK_MISSING_CAPS; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf-sdio3"); From fa7964147da57b2d40c2db2b6ed98fb7dc934bff Mon Sep 17 00:00:00 2001 From: Nadav Haklai Date: Tue, 6 Oct 2015 03:22:36 +0200 Subject: [PATCH 4/7] mmc: sdhci-pxav3: disable clock inversion for HS MMC cards According to 'FE-2946959' erratum the clock inversion option is needed to support slow frequencies when the card input hold time requirement is high. This setting is not required for high speed MMC and might cause timing violation. Signed-off-by: Nadav Haklai Cc: # v4.2 Reviewed-by: Gregory CLEMENT Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pxav3.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 976cddd6d1571b..89a9e49e2ea874 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -291,6 +291,9 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) uhs == MMC_TIMING_UHS_DDR50) { reg_val &= ~SDIO3_CONF_CLK_INV; reg_val |= SDIO3_CONF_SD_FB_CLK; + } else if (uhs == MMC_TIMING_MMC_HS) { + reg_val &= ~SDIO3_CONF_CLK_INV; + reg_val &= ~SDIO3_CONF_SD_FB_CLK; } else { reg_val |= SDIO3_CONF_CLK_INV; reg_val &= ~SDIO3_CONF_SD_FB_CLK; From 2162d9f41e7c4778b96b8e3b97adcedbadc861f1 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 6 Oct 2015 03:22:37 +0200 Subject: [PATCH 5/7] mmc: sdhci-pxav3: fix error handling of armada_38x_quirks In case of armada_38x_quirks error, all clocks should be cleaned-up, same as after mv_conf_mbus_windows failure. Signed-off-by: Marcin Wojtas Cc: # v4.2 Reviewed-by: Gregory CLEMENT Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pxav3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 89a9e49e2ea874..f5edf9d3a18a20 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -402,7 +402,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { ret = armada_38x_quirks(pdev, host); if (ret < 0) - goto err_clk_get; + goto err_mbus_win; ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info()); if (ret < 0) goto err_mbus_win; From af951761d01c89eea8f1dcccf8010218e4b55817 Mon Sep 17 00:00:00 2001 From: "ludovic.desroches@atmel.com" Date: Thu, 17 Sep 2015 10:16:19 +0200 Subject: [PATCH 6/7] mmc: sdhci: add quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST The Atmel sdhci device needs a new quirk. sdhci_set_clock set the Clock Control Register to 0 before computing the new value and writing it. It disables the internal clock which causes a reset mecanism. If we write the new value before this reset mecanism is done, it will prevent the stabilisation of the internal clock, so a delay is needed. This delay is about 2-3 cycles of the base clock. To be safe, a 1 ms delay is used. Signed-off-by: Ludovic Desroches Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 2 ++ drivers/mmc/host/sdhci.h | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 64b7fdbd1a9cca..fbc7efdddcb5a4 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1160,6 +1160,8 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) host->mmc->actual_clock = 0; sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST) + mdelay(1); if (clock == 0) return; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 7c02ff46c8ac3e..9d4aa31b683ac2 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -412,6 +412,11 @@ struct sdhci_host { #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) /* Broken Clock divider zero in controller */ #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) +/* + * When internal clock is disabled, a delay is needed before modifying the + * SD clock frequency or enabling back the internal clock. + */ +#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST (1<<16) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ From 88c6eb0e3b81a30514d21679735fa25d028c2299 Mon Sep 17 00:00:00 2001 From: "ludovic.desroches@atmel.com" Date: Thu, 17 Sep 2015 10:16:20 +0200 Subject: [PATCH 7/7] mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk The Atmel sdhci device needs the SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk. Without it, the internal clock could never stabilised when changing the sd clock frequency. Signed-off-by: Ludovic Desroches Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-of-at91.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index d1556643a41d32..a0f05de5409f7d 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -43,6 +43,7 @@ static const struct sdhci_ops sdhci_at91_sama5d2_ops = { static const struct sdhci_pltfm_data soc_data_sama5d2 = { .ops = &sdhci_at91_sama5d2_ops, + .quirks2 = SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST, }; static const struct of_device_id sdhci_at91_dt_match[] = {